eMMC boot linux distros for Pinebook.
#1
Are Xenial Mate and AOSC the only linux disros available to flash to the eMMC on the Pinebook?

I recently bought a 64Gb eMMC and could not flash Xenial Mate to it. I just got a "No eMMC detected" message. I opened a ticket on the support forum and they advised me to try and install Android 6. This worked but I want a linux on my Pinebook.

Also I do not want to boot from a Micro SD.

Can anyone help
  Reply
#2
(03-06-2019, 03:39 PM)frank-zappa Wrote: Are Xenial Mate and AOSC the only linux disros available to flash to the eMMC on the Pinebook?

I recently bought a 64Gb eMMC and could not flash Xenial Mate to it. I just got a "No eMMC detected" message. I opened a ticket on the support forum and they advised me to try and install Android 6. This worked but I want a linux on my Pinebook.

Also I do not want to boot from a Micro SD.

Can anyone help

Try Q4OS, it boots up from SD and dd image over to eMMC.
  Reply
#3
(03-06-2019, 04:26 PM)tllim Wrote:
(03-06-2019, 03:39 PM)frank-zappa Wrote: Are Xenial Mate and AOSC the only linux disros available to flash to the eMMC on the Pinebook?

I recently bought a 64Gb eMMC and could not flash Xenial Mate to it. I just got a "No eMMC detected" message. I opened a ticket on the support forum and they advised me to try and install Android 6. This worked but I want a linux on my Pinebook.

Also I do not want to boot from a Micro SD.

Can anyone help

Try Q4OS, it boots up from SD and dd image over to eMMC.

How easy is that to do?
  Reply
#4
I would back up anything on the eMMC I would want to save, then look here:

http://wiki.pine64.org/index.php/NOOB#Fl..._a_SD_Boot

I don't have a Pinebook yet, but I'm thinking you also could put the image on a USB drive, boot from the microSD, then enter something like "sudo dd if=/path/to/distro.img of=/dev/mmcblk2" on the command line.  Don't just copy and paste that.  I'm used to BSD and MacPorts, so I would search this forum to find the correct the Linux command for a Pinebook.
  Reply
#5
(03-23-2019, 12:39 PM)zaius Wrote: [...] but I'm thinking you also could put the image on a USB drive, boot from the microSD, then enter something like "sudo dd if=/path/to/distro.img of=/dev/mmcblk2" on the command line.  […]
This is generally how I do it since they're all full OS images.
[ PHP Developer | Pinebook 1G | About me ]
  Reply
#6
Thanks for your recent posts soupbowl and zaius.

I posted this thread because I had issues getting Xenial Mate to install on a new eMMC.

I have started a new thread that better explains my situation.
I would be grateful if you'd take a look at it as you both sound like you know your stuff.
https://forum.pine64.org/showthread.php?tid=7278

Thanks again. I will be "rating" you both positively. As I do with anyone whop responds in a helpful manner.
  Reply
#7
I had no issue installing Armbian Stretch to my Pinebook 14's eMMC chip. Just use the armbian-config utility-- when you have the utility open in a terminal, the install to eMMC option is under Armbian, then Install.

Also, unless you use Armbian Bionic, I believe you have to install your own desktop window manager. Since I'm using Armbian Stretch, I installed Xfce and set it to startup on boot, again with armbian-config.
  Reply
#8
(04-01-2019, 10:37 AM)FrancisTheodoreCat Wrote: I had no issue installing Armbian Stretch to my Pinebook 14's eMMC chip. Just use the armbian-config utility-- when you have the utility open in a terminal, the install to eMMC option is under Armbian, then Install.

Also, unless you use Armbian Bionic, I believe you have to install your own desktop window manager. Since I'm using Armbian Stretch, I installed Xfce and set it to startup on boot, again with armbian-config.

So, just to clarify.
I boot Armbian Bionic from the MicroSD? Would I find the "armbian-config utility" in the menus?
I'm not a total noob but i am not exactly a tech savvy linux user either? This is still a bit of a learning curve for me?
  Reply
#9
(04-21-2019, 04:45 PM)frank-zappa Wrote:
(04-01-2019, 10:37 AM)FrancisTheodoreCat Wrote: I had no issue installing Armbian Stretch to my Pinebook 14's eMMC chip. Just use the armbian-config utility-- when you have the utility open in a terminal, the install to eMMC option is under Armbian, then Install.

Also, unless you use Armbian Bionic, I believe you have to install your own desktop window manager. Since I'm using Armbian Stretch, I installed Xfce and set it to startup on boot, again with armbian-config.

So, just to clarify.
I boot Armbian Bionic from the MicroSD? Would I find the "armbian-config utility" in the menus?
I'm not a total noob but i am not exactly a tech savvy linux user either? This is still a bit of a learning curve for me?

INSTALL ARMBIAN to eMMC

1) Download Armbian bootable disk image; https://www.armbian.com/pinebook-a64/#co...et-5-0-0-0

2) Use Balena Etcher to write the image onto a micro-SD card

3) Insert SD card into slot of Pinebook (may have to push it in with a small blunt tool.)

4) Boot to Armbian and go to [Applications] -> [Settings] -> [Armbian-Config]. A terminal window will open.

5) Then in that terminal window; [System] -> [Install] -> [Boot from eMMC]. Warning - this will erase everything previously on the eMMC.

The rest should be automatic.
  Reply
#10
(08-03-2019, 01:48 PM)armhfadillo Wrote:
(04-21-2019, 04:45 PM)frank-zappa Wrote:
(04-01-2019, 10:37 AM)FrancisTheodoreCat Wrote: I had no issue installing Armbian Stretch to my Pinebook 14's eMMC chip. Just use the armbian-config utility-- when you have the utility open in a terminal, the install to eMMC option is under Armbian, then Install.

Also, unless you use Armbian Bionic, I believe you have to install your own desktop window manager. Since I'm using Armbian Stretch, I installed Xfce and set it to startup on boot, again with armbian-config.

So, just to clarify.
I boot Armbian Bionic from the MicroSD? Would I find the "armbian-config utility" in the menus?
I'm not a total noob but i am not exactly a tech savvy linux user either? This is still a bit of a learning curve for me?

INSTALL ARMBIAN to eMMC

1) Download Armbian bootable disk image;   https://www.armbian.com/pinebook-a64/#co...et-5-0-0-0

2) Use Balena Etcher to write the image onto a micro-SD card

3) Insert SD card into slot of Pinebook (may have to push it in with a small blunt tool.)

4) Boot to Armbian and go to [Applications] -> [Settings] -> [Armbian-Config].  A terminal window will open.

5)  Then in that terminal window;  [System] -> [Install] -> [Boot from eMMC].   Warning - this will erase everything previously on the eMMC.

The rest should be automatic.

Many thanks. 
I am currently on vacation but will give that a try when I return. 

Are there still issues with Armbian regarding sound?
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  How does the Pinebook Pro boot? stefan.schumacher 6 494 08-09-2019, 01:22 PM
Last Post: Luke
  Firefox freezes Pinebook forcing hard reboot chris-justExploded 1 148 08-05-2019, 01:11 AM
Last Post: chris-justExploded
  Pinebook left USB port not working - while right port does. armhfadillo 2 75 08-04-2019, 07:06 PM
Last Post: armhfadillo
  No sound on Pinebook 64 theadscotsman 3 168 08-03-2019, 09:56 PM
Last Post: armhfadillo
  Anyone Selling their Pinebook ?? spikerguy 9 363 08-02-2019, 01:36 PM
Last Post: afandian
  Pinebook for sale Oxford UK afandian 0 82 08-02-2019, 01:31 PM
Last Post: afandian
  Unable to use PineBook anymore baltasarq 11 424 07-27-2019, 08:03 PM
Last Post: Dbh12
Information About the Pinebook - What to expect Luke 149 57,907 07-11-2019, 11:56 AM
Last Post: x0r
  Pinebook Wallpaper Collection 1 fire219 1 240 06-26-2019, 11:59 PM
Last Post: RMJ250
  OS recommendation for pinebook? lucabe72 5 486 06-21-2019, 03:39 PM
Last Post: jezek

Forum Jump:


Users browsing this thread: 1 Guest(s)