Hello,

I received a week ago my Pine64 2GB version with  the WiFi BTmodule and it seems that the Bluetooth doesn't work.
I tried with the Ubuntu image, when I activate the Bluetooth all the other items of the bluetooth menu stays grey even after a reboot.

Did I miss something?

Also, I wonder if the WiFi/bluetooth module I received is defective, one of the connector doesn't slide all the way down,
I checked with a magnifier and it seems there is something metallic stuck in the pin 3 of the 14 pins connector.

Thanks

That's a very creative customs declaration for a product I bought for 20$, right?

I still don't have my Pine64+. I have a question for those familiar with the board's spec.

Can the Pine64 power a Portable USB Monitor such as the Asus MB168B+. Info is here: https://www.asus.com/us/Monitors/MB168BPlus/overview/

The last two posts I did were hijacked by idiots who wanted to know how real my cards were. I'm going to try this again. 

How will I know if the board is working? Right now I have just power, HDMI and a mouse. I just put the 32GB card (NOT A FAKE SO DON'T BOTHER ME WITH THAT) in that is loaded with Android 20160216. The only thing I'm getting is a black screen for the last 5 minutes. It turns on for 15 seconds and then the light on the monitor light flashes.

Ubuntu newbie here.  Loaded lighttpd  (apt-get) and it failed.

Pine64 2gb memory
NEW Ubuntu Pine64 ML-Anderal.img

lighttpd failed

Apr 19 11:47:57 TMS-160 systemd[1]: Starting Lighttpd Daemon...
-- Subject: Unit lighttpd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/lis...temd-devel
--
-- Unit lighttpd.service has begun starting up.
Apr 19 11:47:57 TMS-160 lighttpd[13991]: /usr/sbin/lighttpd: symbol lookup error: /usr/sbin/lighttpd: undefined symbol: FAMNoExists
Apr 19 11:47:58 TMS-160 systemd[1]: lighttpd.service: Control process exited, code=exited status=127
Apr 19 11:47:58 TMS-160 systemd[1]: Failed to start Lighttpd Daemon.
-- Subject: Unit lighttpd.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/lis...temd-devel
--
-- Unit lighttpd.service has failed.
--
-- The result is failed.
Apr 19 11:47:58 TMS-160 systemd[1]: lighttpd.service: Unit entered failed state.
Apr 19 11:47:58 TMS-160 systemd[1]: lighttpd.service: Failed with result 'exit-code'.

Hello everyone ,

I bought the pine 64 on march but i have a question , 

I have a iMac 2010 screens and i want to use it as a monitor but the question is how ?

Actually isn't a display port is the older model i have searched and didn't found any answer / full specs .

I searched how it will work with Raspberry but i think i need a newer model ( Later 2011 ) to do it .

Thanks for any responses .

I'm trying to install PHP5 so that I can run a Dokuwiki server, but I get this error message:

I know this just me being a bonehead, but I can't figure out how to set a static IP on the Pine64.  I managed to set the address once with no problems, but after I re-imaged the sd card and tried to set the address the next couple of times, I managed to screw it up so badly that I had to re-image the sd card after each attempt.

I tried a couple of ways that failed (I can't remember what I did the first successful time):
Edited /etc/network/interfaces

Added these lines:
auto eth0
iface eth0 inet static
address 192.168.1.206
netmask 255.255.255.0
gateway 192.168.1.1

This didn't work.

Then I noticed a strange (to me) lines in the interfaces file:
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

So I edited the eth0 file in interfaces.d and added the lines above to it.

Didn't work either.

Anyone have an idea on what I am doing wrong?
Thanks.

I just stood up a simple Samba server on my Pine64, configured the same as my existing Pi2 server.  I tested it using a robocopy backup script with a set of sample files.  Here are the details:

Files:
1 ripped dvd
1000+ epub books
Miscellaneous small files

Configuration:
Pi 2 model B
WD Red 3tb drive
Sabrent USB3.0 enclosure

Pine64 2mb
WD Red 3tb drive
Sabrent USB3.0 enclosure

Quick results:
Pi2
----------------------------------------------------------------------------------
               Total    Copied   Skipped  Mismatch    FAILED    Extras
    Dirs :      1752      1752         0         0         0         0
   Files :      4482      4482         0         0         0         0
   Bytes :   5.490 g   5.490 g         0         0         0         0
   Times :   0:17:20   0:15:55                       0:00:00   0:01:25


   Speed :             6170786 Bytes/sec.
   Speed :             353.095 MegaBytes/min.
   Ended : Tuesday, April 19, 2016 9:16:25 AM

Pine64
----------------------------------------------------------------------------------
               Total    Copied   Skipped  Mismatch    FAILED    Extras
    Dirs :      1752      1752         0         0         0         0
   Files :      4482      4482         0         0         0         0
   Bytes :   5.490 g   5.490 g         0         0         0         0
   Times :   0:06:47   0:06:06                       0:00:00   0:00:41


   Speed :            16096822 Bytes/sec.
   Speed :             921.067 MegaBytes/min.
   Ended : Tuesday, April 19, 2016 9:27:49 AM
-------------------------------------------------------------------------------

I also then deleted test files, and the Pine64 won easily.

Pi2 - avg 33 items/sec, time 3:40
Pine64 - avg 45 items/sec, time 2:40

--------------------------------------------------------------------------
This is just what I was hoping for.   Now to install DokuWiki and see how it compares to the Pi.

tllim in particular, but anyone else in the know too.

What plans if any are being made to help address the large amount of HDMI issues folks are reporting (myself included).  Of particular interest is simply being able to use the board at this point.

Thanks,