Manjaro ARM 20.04
#1
Manjaro ARM 20.04 

Original Manjaro Forum Thread


Please do watch the updates section for regular updates and its discussions.
Manjaro ARM Stable Branch Updates
Manjaro ARM Testing Branch Updates

We have moved to dual partition for Pinebookpro since 20.04, we advice everyone having any older installation than 20.04 to reflash to 20.04



Thanks to @Strit for all his time & effort and @tsys for sharing the Mainline Kernel patches.


Please share your experience & feedback's. It really helps the developers

Thank You.
Manjaro ARM Team.
  Reply
#2
(05-21-2020, 04:55 PM)spikerguy Wrote: Manjaro ARM 20.04 

Original Manjaro Forum Thread


Please do watch the updates section for regular updates and its discussions.
Manjaro ARM Stable Branch Updates
Manjaro ARM Testing Branch Updates

We have moved to dual partition for Pinebookpro since 20.04, we advice everyone having any older installation than 20.04 to reflash to 20.04



Thanks to @Strit for all his time & effort and @tsys for sharing the Mainline Kernel patches.


Please share your experience & feedback's. It really helps the developers

Thank You.
Manjaro ARM Team.

The 20.04 experience is much improved over 20.03! Unfortunately, the new u-boot that ships with Manjaro seems to make it impossible to boot certain OSes from either SD or USB, namely the Chromium 79 build, as well as Q4OS and Armbian. Attempting to boot those OSes only resulted in a backlight black screen, whereas users who have a different OS installed on their EMMC seem to be able to boot these OSes just fine. I know my SD card is not the problem because I was able to boot both Fedora and PostmarketOS from it successfully with 20.04 on my EMMC. Other then that I have had zero problems with this Manjaro version.
  Reply
#3
https://github.com/mrfixit2001/updates_r.../uboot.img
  Reply
#4
Newbie: Issue with WiFi 802.11 AC + Bluetooth 5.0
Bluetooth works...
But no Wifi connectivity

/etc/NetworkManager/NetworkManager.conf is blank
inxi -Nnz returns:
Network: Message: No ARM data found for this feature.

Seems like the wifi hardware is unrecognized.
Next Steps?
  Reply
#5
(05-28-2020, 11:24 AM)mstrstvns Wrote: Newbie: Issue with WiFi 802.11 AC + Bluetooth 5.0
Bluetooth works...
But no Wifi connectivity

/etc/NetworkManager/NetworkManager.conf is blank
inxi -Nnz returns:
Network:      Message:      No ARM data found for this feature.

Seems like the wifi hardware is unrecognized.
Next Steps?

Hello dear, 

Sorry for the inconvenience looks like factory people have  kept the wifi off using privacy key.  Please press these 2 buttons and then restart it will work fine. 

Code:
Pine Key + F11

It was reported on the official twitter handle aswell on manjaro forum.
Pine64 Twitter account

Manjaro forum post

Hope this will help you.
  Reply
#6
I installed Manjaro xfce end of November 2019. I keep on upgrading without a fresh install.

When the screensaver xfce4-screensaver kicks in (either on its own timeout or, surprisingly through "xset dpms force off"), it blanks the screen. Upon a keyboard click, the desktop does not completely come back:
  • I see the desktop with all its windows. Windows also show updates (e.g. top in a terminal)
  • I can move the mouse.
  • I can not click on anything.
  • I can not type anything.
I need to kill xfce4-screensaver to click and type, again. It looks like the screensaver is not undoing all its tasks. It only disabled its own window so that the deskop becomes visible, again.

xfce4-screensaver would probably call that "Request unlock but we don't have any windows!":

Code:
[gs_debug_init] gs-debug.c:115 (22:42:17.334):     Debugging enabled
[main] xfce4-screensaver.c:97 (22:42:17.335):     Initializing xfce4-screensaver 0.1.10
[init_session_id] gs-listener-dbus.c:2186 (22:42:17.392):     Got session-id: /org/freedesktop/login1/session/_310
[gs_listener_init] gs-listener-dbus.c:2212 (22:42:17.392):     Acquiring logind sleep inhibitor lock
[gs_listener_x11_set_timeouts] gs-listener-x11.c:312 (22:42:17.421):     Saver timeout updated to 300 seconds
[gs_listener_x11_acquire] gs-listener-x11.c:288 (22:42:17.581):     ScreenSaver Registered
[gs_manager_request_unlock] gs-manager.c:1325 (22:42:18.427):     Request unlock but manager is not active
[xroot_filter] gs-listener-x11.c:251 (22:42:18.977):     ScreenSaver timer reset
[xroot_filter] gs-listener-x11.c:256 (22:42:21.176):     Activating screensaver on ScreenSaverOn
[gs_grab_grab_root] gs-grab-x11.c:347 (22:42:21.177):     Grabbing the root window
[gs_grab_get] gs-grab-x11.c:104 (22:42:21.367):     Grabbing devices for window=389
[gs_manager_create_windows_for_display] gs-manager.c:1178 (22:42:21.369):     Creating 1 windows for display :0
[add_overlays] gs-manager.c:1016 (22:42:21.370):     Reconfiguring monitors, adding overlays
[gs_listener_send_signal_active_changed] gs-listener-dbus.c:224 (22:42:21.370):     Sending the ActiveChanged(TRUE) signal on the session bus
[xroot_filter] gs-listener-x11.c:251 (22:42:22.072):     ScreenSaver timer reset
[remove_overlays] gs-manager.c:1045 (22:42:23.372):     Done reconfiguring monitors, removing overlays
[gs_manager_request_unlock] gs-manager.c:1335 (22:42:26.470):     Request unlock but we don't have any windows!

I temporarily removed the ~/.config/ directory for a fresh configuration of xfce4. No change. Google is not helpful.


Update 1: further logs

Before screensaver kicks in

Code:
manjaro:~$ xfce4-screensaver-command -q
The screensaver is inactive
The screensaver is not inhibited


When screensaver kicks in

Code:
manjaro:~$ xfce4-screensaver-command -q
The screensaver is active
The screensaver is not inhibited


When I press a key, the desktop comes back (but I can neither click or type)

Code:
manjaro:~$ xfce4-screensaver-command -q
The screensaver is active
The screensaver is not inhibited


Instead of killing xfce4-screensaver, I can also ask the screensaver to deactivate itself

Code:
manjaro:~$ xfce4-screensaver-command -d


Code:
manjaro:~$ xfce4-screensaver-command -q
The screensaver is inactive
The screensaver is not inhibited


Somehow, nobody is asking to deactivate the screensaver. I don't want to do that manually all the time from the console.


Update 2: I noticed that I have the screensaver problem with fb-turbo, but no with panfrost. So, how can the screensaver get deactivated with fb-turbo? The more interesting questions are why and how does fb-turbo interfere with the screensaver in the first place?
  Reply
#7
@spikerguy Quick question (yes, I know)... Is it just me, or does


Code:
sudo tee /sys/bus/platform/drivers/dwmmc_rockchip/{un,}bind <<< 'fe310000.dwmmc'

not (or no longer) work on the PBP to drop / reconnect the WiFi card, thus saving the need to reboot? It was apparently working Jan/Feb judging from other forum posts, but doesn't seem to give any joy on Manjaro ARM. The unending spew of error messages in dmseg continues regardless. Big Grin Big Grin
  Reply
#8
I am currently running 20.06 on my PBP and I managed to mess up locales entirely. After many hours of searching I found one post in the Manjaro forums and it helped a great deal, now I have my locales properly generated, while I have a Hungarian keymapping:
https://forum.manjaro.org/t/kde-locales-...p/81204/17

Just wanted to share here, in case other noobs like me will have the same issue. Big Grin

EDIT:
Of course default folders need to be generated again to have them in the desired language. I followed this post: https://forum.manjaro.org/t/locale-issue/53757/17
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Question Help: Pinebook Pro will not enter sleep [Manjaro 20.04] EverythingIsInput 11 335 3 hours ago
Last Post: tophneal
  Manjaro SD card boot issue aeastw 7 170 3 hours ago
Last Post: tophneal
  Hate Manjaro - Easy Ubuntu Install? PaulMcGuinness 7 265 06-03-2020, 03:09 PM
Last Post: Eight Bit
  Slow WiFi on Manjaro Default Image 20.04 for PBP SuperUJ 8 294 05-28-2020, 08:16 PM
Last Post: nekojet
  gcc v7.1 or higher distro? Manjaro have it? mgrabenstein 3 98 05-26-2020, 10:57 AM
Last Post: xmixahlx
  Manjaro and Arch repository with privacy oriented software as400 17 1,948 05-26-2020, 03:06 AM
Last Post: as400
  Trying to Install Manjaro-ARM-kde-plasma-pbpro-20.04 stefan.schumacher 2 186 05-23-2020, 02:44 AM
Last Post: stefan.schumacher
  Manjaro ARM 19.12 Official Release - PineBook Pro spikerguy 264 41,885 05-21-2020, 04:21 PM
Last Post: Luke
  Link to the Official (from factory) manjaro image? gandlers 4 171 05-19-2020, 03:36 PM
Last Post: erchache2000
  Manjaro 20.03 did not update. MrDitchy 3 152 05-19-2020, 11:37 AM
Last Post: oldmansaur

Forum Jump:


Users browsing this thread: 1 Guest(s)