erase spi flash
大家好，我只是想将pinebook pro恢复为出厂默认设置，并且想擦除闪存，所以找到了以下命令：
flash_erase / dev / mtd0 0 0
我想知道的是，仅运行上面的命令即可将spi flash擦除为默认值？
如果有人知道，请告诉我。
谢谢。
Hi every, I wanna konw the command "flash_erase /dev/mtd0 0 0" is erase the spi to factory defsult?
After I run this command "flash_erase /dev/mtd0 0 0" and do not flash ang "spiflash.bin" to /dev/mtd0, then reboot form the sd card will be ok ?
Or after flash_erase /dev/mtd0 must be flash a new spiflash to /dev/mtd0 (erase spi flash cannot boot normally) ?
if anyone knows, tell me please, thanks.
flash_erase / dev / mtd0 0 0
我想知道的是，仅运行上面的命令即可将spi flash擦除为默认值？
如果有人知道，请告诉我。
谢谢。
Hi every, I wanna konw the command "flash_erase /dev/mtd0 0 0" is erase the spi to factory defsult?
After I run this command "flash_erase /dev/mtd0 0 0" and do not flash ang "spiflash.bin" to /dev/mtd0, then reboot form the sd card will be ok ?
Or after flash_erase /dev/mtd0 must be flash a new spiflash to /dev/mtd0 (erase spi flash cannot boot normally) ?
if anyone knows, tell me please, thanks.