+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: General Discussion on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=112)
+--- Thread: erase spi flash (/showthread.php?tid=13577)
erase spi flash - aiminick - 04-07-2021
大家好，我只是想将pinebook pro恢复为出厂默认设置，并且想擦除闪存，所以找到了以下命令：
flash_erase / dev / mtd0 0 0
我想知道的是，仅运行上面的命令即可将spi flash擦除为默认值？
如果有人知道，请告诉我。
谢谢。
Hi every, I wanna konw the command "flash_erase /dev/mtd0 0 0" is erase the spi to factory defsult?
After I run this command "flash_erase /dev/mtd0 0 0" and do not flash ang "spiflash.bin" to /dev/mtd0, then reboot form the sd card will be ok ?
Or after flash_erase /dev/mtd0 must be flash a new spiflash to /dev/mtd0 (erase spi flash cannot boot normally) ?
if anyone knows, tell me please, thanks.
RE: erase spi flash - tophneal - 04-07-2021
This should help: https://wiki.pine64.org/wiki/Pinebook_Pro_SPI#Zeroing_out_the_SPI
(as a side note, i've merged your duplicate post here, and removed the other.)