NVME problem

[chaoskampf]

Did you have to fold the ribbon cable from the main board to the adapter, at all? Pinches on the ribbon cable can cause it to disappear.

I was able to do this without folding the ribbon. It looks like ok. Just ordered nvme to usb adapter to check if the ssd is broken.

UPD1:
After I secured the ribbon with tape I was able to get nvme work after boot once. But after next reboot it is not available anymore.

UPD2:
Smth wired. The nvme seems to work only after poweroff but not after reboot.

UPD3:
After adding the following line to crontab issue is probably solved (because save switch is not supported).

Code:

sudo nvme set-feature /dev/nvme0 -f 2 -v 2

The battery was lower 15% today for the first time after I've installed the ssd.