03-20-2020, 03:33 PM
There are some pictures in the wiki.
In the picture with PBP openned up, the adapter mounts to the right of the track pad.
The ribbon connector is a bit delicate on the motherboard (BE CAREFUL)
DanielT and wizard both have some Excellent pictures and description posts for installing this.
(Possibly posted in November 2019 ? )
For me, I have no problem mounting the drive to the adapter board, but many have not understood that 'step'
The little piece with the slot in it, is also a double sided nut, the cut-out on your drive fits into that slot.
(push the terminal end of your drive into the female connector on the adapter, the secure it with the post)
and the post is secured to the adapter board with a screw from the backside of the board.
( So you mount the drive to the adapter first, then mount that into your PBP. )
IF you are mechanically inclined it should not be too difficult,
but if it appears difficult, perhaps ask someone for assistance.
In the picture with PBP openned up, the adapter mounts to the right of the track pad.
The ribbon connector is a bit delicate on the motherboard (BE CAREFUL)
DanielT and wizard both have some Excellent pictures and description posts for installing this.
(Possibly posted in November 2019 ? )
For me, I have no problem mounting the drive to the adapter board, but many have not understood that 'step'
The little piece with the slot in it, is also a double sided nut, the cut-out on your drive fits into that slot.
(push the terminal end of your drive into the female connector on the adapter, the secure it with the post)
and the post is secured to the adapter board with a screw from the backside of the board.
( So you mount the drive to the adapter first, then mount that into your PBP. )
IF you are mechanically inclined it should not be too difficult,
but if it appears difficult, perhaps ask someone for assistance.
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
**BCnAZ**
Donate to $upport
your favorite OS Team
