11-07-2019, 05:43 PM
(11-07-2019, 11:51 AM)hdk Wrote:(11-07-2019, 09:52 AM)tophneal Wrote:(11-07-2019, 09:49 AM)Feakster Wrote:(11-07-2019, 09:38 AM)tophneal Wrote: Maybe not. Currently it wouldn't be a bootable drive. It would appear as a secondary drive.
Sent from my iPhone using Tapatalk
But surely you could just flash the image to the NVMe drive, and change "root=/dev/mmcblk1p2" in /boot/extlinux/extlinux.conf to "root=/dev/nvme0n1p2"? Then, everything would be running off the NVMe drive
Ben
Potentially. It was discussed briefly in another thread. I believe the final sentiment of the thread was "we won't truly know until someone tries."
I have put a NVMe SSD in my PBP.
Toshiba OCZ RC100, 240 GB, m.2 2242: 42mm long. So I could take 3 cm off of the adapter.
All is working very well, no problem with the touchpad.
After starting up the NVMe SSD was mounted and known as /dev/nvme0n1. (Gparted)
I would like to give it a try.
Supply me with detailed instructions s'il vous plaît.
What OS did you use? Was there any extra configuration required? I have installed NVME too, but it doesn't appear anywhere, neither in lsblk nor in lspci.
