Clusterboard Pinouts
#1
I made an overview of the GPIO header for the nodes while playing with my Clusterboard prototype, maybe it helps others working on this...

   

Maybe someone can verify this against the schematics again...
Come have a chat in the Pine IRC channel >>
#2
(02-15-2018, 05:36 AM)xalius Wrote: I made an overview of the GPIO header for the nodes while playing with my Clusterboard prototype, maybe it helps others working on this...



Maybe someone can verify this against the schematics again...

Appreciates and thanks.
#3
(02-15-2018, 05:36 AM)xalius Wrote: I made an overview of the GPIO header for the nodes while playing with my Clusterboard prototype, maybe it helps others working on this...



Maybe someone can verify this against the schematics again...

Thanks for doing this. Is there no 3v3VCC? If the I/O's are all 3v3 then the lack of a 3v3 pin seems strange?
#4
(02-15-2018, 05:36 AM)xalius Wrote: I made an overview of the GPIO header for the nodes while playing with my Clusterboard prototype, maybe it helps others working on this...



Maybe someone can verify this against the schematics again...

The pins are numbered differently on the board.  One row is 1-10, the other is 11-20.
#5
(03-20-2019, 04:47 PM)AZClusterboard Wrote: The pins are numbered differently on the board.  One row is 1-10, the other is 11-20.

Huh

Depends on your definition of row. Is it a 10 column, 2 row or a 2 column, 10 row header? Both xalius and I obviously think it's a 10 row, two column header pinout, with pins 1 and 19 marked so you don't get it back-to-front :-P If you have the board oriented so you the ethernet jack is at the back, the document matches the pinout. I would have done it the other way, only because I tend to have the usb ports and on-board LEDs facing me for visibility.


.jpg   clusterboard v2.2 gpio header.jpg (Size: 81.72 KB / Downloads: 256)


Possibly Related Threads…
Thread Author Replies Views Last Post
  Managed Ethernet switch on the Clusterboard dsimic 4 581 07-28-2021, 03:54 AM
Last Post: dsimic
  Clusterboard not getting IP address after network fix Norlark 13 1,486 06-14-2021, 07:04 PM
Last Post: poVoq
  Schematics for customising the Clusterboard TechDragon 0 264 05-25-2021, 10:28 AM
Last Post: TechDragon
Information Clusterboard Guide AZClusterboard 9 12,624 04-06-2021, 06:32 AM
Last Post: poVoq
Brick Clusterboard CAD drawings TeaPack 1 1,464 03-31-2021, 01:38 PM
Last Post: Pine
  New Clusterboard Setup wargfn 5 1,994 01-01-2021, 10:10 AM
Last Post: poVoq
  Clusterboard does not even turn on? poVoq 3 2,358 08-15-2020, 07:31 AM
Last Post: poVoq
  Clusterboard <-> Baseboard pinout mappings curtyc 1 2,287 08-08-2020, 06:13 PM
Last Post: lbruno
  What should i pack in the box with my v2.2. clusterboard? timoc 3 2,778 07-23-2020, 03:34 AM
Last Post: pfeerick
  Clusterboard/Modules shipment arrived in a bag ichibon-brosan 2 2,098 07-09-2020, 12:27 PM
Last Post: shadowhelo

Forum Jump:


Users browsing this thread: 1 Guest(s)