Pinecil is working with 5v but nothing else!!

[MizterPink]

My Pinecil has finally arrived and is turning on when powered with 5v via the USB-C on my laptop but when connected to QC there is nothing displayed. I've gone through both troubleshooting pages for this issue. I've reflashed it twice and it doesn't heat when I press the + button. I'm not quite sure what to do with it yet but I did buy the breakout board so more is possible but it has been years since I've experimented with this stuff(LED does display on the breakout board when connected to QC and I've tried 2 different bricks so far) ASUS ROG 65W HDMI CHARGER DOCK - Best Buy (along with the included wire and an Anker wire) and the OE one for the ASUS ROG Ally(with the unremovable wire)..I've flashed with 2.23e.dd4a5500 and 2.22e.c308fe8c with no luck still and I did find the pd debug function while trying to flash and that doesn't do anything with it either!!  I haven't gotten my 5525 ports yet so I can't try it with that... any help is greatly appreciated!!!

[MizterPink]

It is in fact a compatibility issue!! i shall post an issue on the ironOS github! it works with a 45w laptop charger so i know it works!!