How to use ROCKPro64 PCI-e X4 to M.2/NGFF NVMe SSD Interface Card
#1
I connected a PCI NVMe adapter to the RockPro64, but nothing is added to 
Code:
/dev/sd*
 or 
Code:
/dev/nvme*
. The products I tested are as follows:


PM9A1 500GB
FireCuda530 2TB

What could be the problem?

os : Armbian_24.5.1_Rockpro64_noble_current_6.6.31
  Reply
#2
Well, I have a pci card and nvme drive.... so...
dmesg |grep pci should be almost a full page,
the last line mentions nvme
and dmesg |grep nvme should be 5-6 lines
Maybe the pci card is not compatible, OR it is not a nvme type of m2 drive
Cheaper m2 drives are nearly always SATA, this will NOT work
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Installing Wifi drive for the RockPro64 John45595 0 694 02-10-2024, 11:32 PM
Last Post: John45595
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 140,492 09-25-2023, 12:46 AM
Last Post: ChriChri
Wink You don't sell case and fan for "ROCKPro64 4GB Single Board Computer"? Clea 1 1,287 09-17-2023, 12:00 AM
Last Post: tllim
  Want to check maximum toggle speed in Rockpro64 board. kundanjha 0 963 08-14-2023, 07:55 AM
Last Post: kundanjha
  Unable to boot Armbian on new RockPro64 mooseball 5 5,375 07-14-2023, 08:59 AM
Last Post: rockjonn
  Hardware fix for software sound problem on Rockpro64 Ricks Rockpro 0 1,200 04-06-2023, 03:59 PM
Last Post: Ricks Rockpro
  No sound on Rockpro64 with OpenWrt Patrice 1 1,823 04-06-2023, 02:46 PM
Last Post: Ricks Rockpro
  Cant get rockpro64 working brasilikum 3 2,558 03-19-2023, 06:22 AM
Last Post: runyor
  RockPro64 Stopped working WarpLover 5 3,703 02-06-2023, 10:10 AM
Last Post: diizzy
Lightbulb ROCKPro64 + SSD case model for 3D print Spater 0 1,320 01-27-2023, 07:43 PM
Last Post: Spater

Forum Jump:


Users browsing this thread: 1 Guest(s)