PINE64
How to use ROCKPro64 PCI-e X4 to M.2/NGFF NVMe SSD Interface Card - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: General Discussion on ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=99)
+--- Thread: How to use ROCKPro64 PCI-e X4 to M.2/NGFF NVMe SSD Interface Card (/showthread.php?tid=19527)



How to use ROCKPro64 PCI-e X4 to M.2/NGFF NVMe SSD Interface Card - jykeith123 - 11-23-2024

I connected a PCI NVMe adapter to the RockPro64, but nothing is added to 
Code:
/dev/sd*
 or 
Code:
/dev/nvme*
. The products I tested are as follows:


PM9A1 500GB
FireCuda530 2TB

What could be the problem?

os : Armbian_24.5.1_Rockpro64_noble_current_6.6.31


RE: How to use ROCKPro64 PCI-e X4 to M.2/NGFF NVMe SSD Interface Card - wdt - 11-26-2024

Well, I have a pci card and nvme drive.... so...
dmesg |grep pci should be almost a full page,
the last line mentions nvme
and dmesg |grep nvme should be 5-6 lines
Maybe the pci card is not compatible, OR it is not a nvme type of m2 drive
Cheaper m2 drives are nearly always SATA, this will NOT work