Cant get rockpro64 working
Hi everybody,

i have 2 RockPro64 and both behave strange.
I have a hdmi cable, keyboard and a ethernet cable connected. 

The first rockpro64 i was trying to uses crashes a few secounds after the uboot screen. I tried Armbian and Debian and pretty much same behaviour. 

After a few hours of trying the first board i was desperate and wondered if the board is simple broken and tryed the secound board i bought...
and it actually immediatly worked! I could boot the armbian version i previously was unable to boot with the first board! I created a user and logged in from remote via ssh. But now i see i cant use 'shutdown now' and then press the boot button or reset button. I need to reconnect the power for the board to reboot.
So i have 2 questions. 

1. How can i fix the first board? It starts with the uboot screen boots linux but after a few secounds crashes. The screen goes idle and the power led is the only led on the board left on. (even the ethernet led is turned off)

2. What are the reset and boot buttons good for?
Are you sure that you have a reliable and working SD card? Do you have a proper PSU (min 3A that ha some weight to it)? I've had mixed results with various Armbian images in general but does the same occur if you try lets say Manjaro?

2. These are hardware buttons connected to the SoC afaik, reset not going to work the same as if you're using a x86 PC. I dont know offhand what the boot toggles.
(02-04-2023, 02:43 PM)brasilikum Wrote: ...
2. What are the reset and boot buttons good for?

Mine work as per the wiki.
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition Tow-boot on SPI, Arch/SXMO on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, daily driver Tow-boot with Arch/SXMO on eMMC
I am having the same issue, might be related to:
Not sure if this is your case since you are getting different results on two boards.

Here is a recording of the failing boot sequence:

Manjaro worked great and now I am waiting for a Serial adapter for Debian installation.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Hardware fix for software sound problem on Rockpro64 Ricks Rockpro 0 222 04-06-2023, 03:59 PM
Last Post: Ricks Rockpro
  No sound on Rockpro64 with OpenWrt Patrice 1 412 04-06-2023, 02:46 PM
Last Post: Ricks Rockpro
  RockPro64 Stopped working WarpLover 5 1,175 02-06-2023, 10:10 AM
Last Post: diizzy
Lightbulb ROCKPro64 + SSD case model for 3D print Spater 0 353 01-27-2023, 07:43 PM
Last Post: Spater
  RockPro64 and Neon rapier1 2 809 10-21-2022, 07:44 AM
Last Post: rapier1
  After Power Loss feature working bdherouville 2 1,157 08-22-2022, 03:52 AM
Last Post: bdherouville
  RockPro64 ddr clock speed causing system instability CypherShrugged 1 868 08-15-2022, 02:32 PM
Last Post: CypherShrugged
  OPNsense for RockPro64 one8three 2 1,908 08-08-2022, 09:43 PM
Last Post: XaveT
  NAS Optimizations for RockPro64 MNtinkerer 25 7,908 08-03-2022, 01:57 PM
Last Post: MNtinkerer
  How to run Raspberry Pi software on RockPro64? pk245 0 1,083 06-24-2022, 08:20 AM
Last Post: pk245

Forum Jump:

Users browsing this thread: 1 Guest(s)