PSA: Transition in progress - don't update !
#11
(11-04-2020, 03:49 AM)a-wai Wrote: FYI, latest nighly should work fine, and may be stable enough; I can not guarantee this one is future-proof yet, but we're getting closer Wink
Tank you for the new image!
IMHO sound is completely broken. Playing video or soundtrack with mpv gives no output on headphones and is badly distorted on loudspeakers.
  Reply
#12
Rainbow 
(11-04-2020, 10:12 AM)LinAdmin2 Wrote:
(11-04-2020, 03:49 AM)a-wai Wrote: FYI, latest nighly should work fine, and may be stable enough; I can not guarantee this one is future-proof yet, but we're getting closer Wink
Tank you for the new image!
IMHO sound is completely broken. Playing video or soundtrack with mpv gives no output on headphones and is badly distorted on loudspeakers.


Thanks @a-wai  Shy Just finished downloading/installing fresh image: mobian-pinephone-20201104.img.gz to microsdcard (latest image). Runs great. Sound works great for me now (previously had an issue).

Not only does my sound and everything tested work so far, my bluetooth headphones have been playing a podcast on the first try for the first time ever on my Pinephone! Have been playing without any fail for over an hour straight now. Previously they had disconnected after a minute or so.

Thanks for the hard work. Much appreciated.  Smile
- RTP

"In the beginner's mind there are many possibilities, in the expert's mind there are few." -Shunryu Suzuki

My Blog: https://politictech.wordpress.com
  Reply
#13
(11-04-2020, 03:49 AM)a-wai Wrote: FYI, latest nighly should work fine, and may be stable enough; I can not guarantee this one is future-proof yet, but we're getting closer Wink

For sure mobian-pinephone-20201104.img.gz good enough to get me going again.

Default Videos application seems to hard hang and needs reboot. After installing mpv all is fine, both sound and video.

Suspect will not wake from Crust sleep, hung once with blue notification light flashing - can't test more at the moment as

Sharing mobile data via UBS-C/dongle/Ethernet works fine
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now "groovy", Openbox desktop for general purpose daily PC.
  • PinePhone BraveHeart now v1.2b 3/32Gb daily driver, dual boot via p-boot with Mobian/f2fs/Phosh on eMMC, Arch/f2fs/Phosh on SDcard
  • PinePhone v1.2a 2G/16Gb that needs USB board replaced
  Reply
#14
Hello, newcomer here. Just flashed this image on my brand-new pinephone. So far it seems like the most stable of the images - well done, it's much appreciated.

What does the blue blinking light mean? I see it sometimes when waking from sleep.
  Reply
#15
(11-04-2020, 05:02 PM)elagost Wrote: What does the blue blinking light mean? I see it sometimes when waking from sleep.
Pending software updates. Maybe other issues too?
  Reply
#16
(11-04-2020, 05:02 PM)elagost Wrote: Hello, newcomer here. Just flashed this image on my brand-new pinephone. So far it seems like the most stable of the images - well done, it's much appreciated.
...

Welcome

(11-04-2020, 05:02 PM)elagost Wrote: ...
What does the blue blinking light mean? I see it sometimes when waking from sleep.

It is a notification light. Will come on for incoming SMS or even Telegram messages as well as battery below 15% etc. On waking from sleep it takes some notification as well, and sometimes keeps going even after you have logged back in. Often times (but not always) clicking the top notification bar will give you the full details of the notification.
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now "groovy", Openbox desktop for general purpose daily PC.
  • PinePhone BraveHeart now v1.2b 3/32Gb daily driver, dual boot via p-boot with Mobian/f2fs/Phosh on eMMC, Arch/f2fs/Phosh on SDcard
  • PinePhone v1.2a 2G/16Gb that needs USB board replaced
  Reply
#17
Blue light always flashes on all my phones, Brave Heart, PMOS, Manjaro phones, That are running Mobian, Arch, Manjaro OSes.
Even in deep sleep.
I thought it is just a power-on indicator ?

@a-wai 

Should we consider November 04  or  05  as a  'reference'   release  ?

Thank You
      LINUX = CHOICES
         **BCnAZ**
               Idea
   Donate to $upport
your favorite OS Team
  Reply
#18
(11-05-2020, 10:28 AM)bcnaz Wrote: Should we consider November 04  or  05  as a  'reference'   release  ?

Definitely not, things will probably take a few more days to stabilize, maybe even a whole week... Rest assured I'll let you all know when the next reference release is out Wink
  Reply
#19
(11-05-2020, 04:55 PM)a-wai Wrote:
(11-05-2020, 10:28 AM)bcnaz Wrote: Should we consider November 04  or  05  as a  'reference'   release  ?

Definitely not, things will probably take a few more days to stabilize, maybe even a whole week... Rest assured I'll let you all know when the next reference release is out
What to do when I get this?:
sh: 1: /usr/sbin/u-boot-install-pinephone: not found
  Reply
#20
(11-03-2020, 03:39 AM)a-wai Wrote: ...
It is recommended that you don't update your system for a few days
...

An update running 20201104 nightly.
1) My earlier fear about not waking from CRUST was unfounded (the first time I had a problem, since then I have had no problems)
2) Not sure where scale-to-fit was on earlier nightlies - seems to be not enacted from 20201104
Code:
gsettings set sm.puri.phoc scale-to-fit true
works fine though.
3) apt upgrade works OK, as you would expect apt dist-upgrade creates a mess that is beyond my skills to tidy!!
4) What is the package name of the Software application? I really want to remove it as I prefer controlling (or ruining!) my life with apt and find its efforts to sanitise things irksome.
5) Getting a lot of
Code:
[34795.577181] anx7688 1-0028:   soft = 0x01
[34795.580805] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d
[34800.589842] anx7688 1-0028: status irq
[34800.595559] anx7688 1-0028:   soft = 0x01
[34800.599261] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d
[34810.052607] anx7688 1-0028: status irq
[34810.056640] anx7688 1-0028:   soft = 0x01
[34810.060307] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d
[34815.069685] anx7688 1-0028: status irq
[34815.075057] anx7688 1-0028:   soft = 0x01
[34815.078707] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d
in dmesg: seems to be related to my dumb wallwart charger, possibly after the battery is fully charged?
6) A feeling in my waters that I cannot measure: previously I had Mobian on eMMC, at the moment it is running from and SDcard (Evo+). My waters say phosh crashes more often when running from an SDcard, i.e. it has some kind of I/O timing problem?

Otherwise at least as good as before, and I do feel smug about having 5.9 even though I stumbled in early because of my dumbness!
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now "groovy", Openbox desktop for general purpose daily PC.
  • PinePhone BraveHeart now v1.2b 3/32Gb daily driver, dual boot via p-boot with Mobian/f2fs/Phosh on eMMC, Arch/f2fs/Phosh on SDcard
  • PinePhone v1.2a 2G/16Gb that needs USB board replaced
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Cant update and upgrade mobian. mode80 5 305 05-06-2021, 07:32 AM
Last Post: C0ffeeFreak
  no camera,streaming after update rvh 0 247 03-21-2021, 08:02 AM
Last Post: rvh
  Phone won't boot after update: red LED 3x5co 7 904 02-16-2021, 01:34 PM
Last Post: 3x5co
  Mobian phone app update 2-14 mw4jet 8 1,177 02-16-2021, 06:53 AM
Last Post: a-wai
  Modem Firmware: update manually or wait? sfb 4 1,230 02-06-2021, 05:14 AM
Last Post: sfb
  Geary crashes during start after recent update p1trson 2 654 01-16-2021, 04:49 AM
Last Post: p1trson
  Status update 2020-12-15 a-wai 34 11,149 01-13-2021, 07:14 AM
Last Post: scott_VYuCAbn3k1NFK
  Modem firmware update SocialNetworkingWasAMistake 8 2,120 01-03-2021, 06:58 PM
Last Post: dcinoz
  Status update 2020-11-15 a-wai 17 6,332 12-05-2020, 05:58 PM
Last Post: bcnaz
  Progress (and Thank you) Zoomzit 0 472 11-12-2020, 01:14 PM
Last Post: Zoomzit

Forum Jump:


Users browsing this thread: 1 Guest(s)