07-31-2018, 08:04 PM
I've been using an A64+ 2GB board since January 2017 as a headless NAS. It's been running with the same power supply and overall setup for essentially the entire time.
The other day, I couldn't SSH into the board. I noticed the LED was off, so I unplugged/replugged the USB power supply.
The LED comes on for about 1 second, shines brighter for a brief moment, then shuts off. The board doesn't boot at all. I've hooked up a monitor and get no output.
If I eject the microSD card, the LED stays on. If I power on without the microSD, then insert it after powering on, the LED stays on, but it doesn't read the card and boot.
I'm kind of at a loss for troubleshooting from here and would appreciate any thoughts. Thank you.
The other day, I couldn't SSH into the board. I noticed the LED was off, so I unplugged/replugged the USB power supply.
The LED comes on for about 1 second, shines brighter for a brief moment, then shuts off. The board doesn't boot at all. I've hooked up a monitor and get no output.
If I eject the microSD card, the LED stays on. If I power on without the microSD, then insert it after powering on, the LED stays on, but it doesn't read the card and boot.
I'm kind of at a loss for troubleshooting from here and would appreciate any thoughts. Thank you.