HELP: PBP screen blanked

[iscmob]

I think then that my last statement was correct.  I'm short on time at the moment, else I could find a post explaining how to do this. Perhaps you can find one, we've had quite a few of them I suppose.

To summarise though, this is what you'll need to do:
1) make a bootable SD, but not Manjaro.  I like to use the Debian Desktop image from the wiki.
2) take the bottom cover off the PBP.
3) switch the eMMC off
4) boot from SD
5) download a bootable eMMC image, preferably just use the same Debian image from step 1.
6) turn the eMMC on
7) "bind" the eMMC
8) install the new image to the eMMC
9) power down
10) reassemble the PBP

Thank you my friend. You saved my PBP. I managed to boot with Debian Desktop microSD card. Thank you so much.

I typed lsblk, and I believe my 64GB emmc is corrupted some how, here's what i got:
-mmcblk0p1 179:1 0 64M 0 part /boot.
Because the 654GB emmc cannot be 64M.

And meanwhile, I have to find in forum how to fix the problematic main charging port is not charging, only the USB-C is able to charge the PBP.

My friend, you are my savior. thanks. I will learn other software as well. But I will need to learn again how to setup the rclone.