U-Boot with direct NVMe boot support for eMMC/SPI Flash

[mamboman777]

Well, I got lots of errors on the build.sh.  I think I may be missing dependencies?

Code:

fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). make: *** No rule to make target 'realclean'.  Stop. make: *** No rule to make target 'bl31'.  Stop. cp: cannot stat 'build/rk3399/release/bl31/bl31.elf': No such file or directory make: *** No rule to make target 'realclean'.  Stop. fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). make: *** No rule to make target 'mrproper'.  Stop. cp: cannot stat '../build/bl31.elf': No such file or directory make: *** No rule to make target 'pinebook-pro-rk3399_defconfig'.  Stop. make: *** No targets specified and no makefile found.  Stop. /home/joshua/Desktop/u-boot-build-scripts-master/build.sh: line 37: tools/mkimage: No such file or directory dd: failed to open 'idbloader-spi.img': No such file or directory cat: u-boot.itb: No such file or directory cp: cannot stat 'idbloader-spi.img': No such file or directory cp: cannot stat 'idbloader.img': No such file or directory cp: cannot stat 'u-boot.itb': No such file or directory make: *** No rule to make target 'mrproper'.  Stop.

Did you install aarch64-linux-gnu-gcc and use git clone --recursive?

Well, I appear to be soft bricked.  I downloaded, extracted, ran the build file and moved to a usb.  I plugged the usb into my PBP, copied the files over, then navigated to the folder with spiflash.bin in it and ran "sudo dd if=spiflash.bin of=/dev/mtd0" which appeared to run successfully.  I then clicked reboot.  The machine will not respond now.  I'm not getting any sort of light when I press the power button.  The charge light on the side is the only light I'm getting.  What can I do next to troubleshoot this?  I've tried pressing the reset button.