Fried eMMC?
#5
With the eMMC inserted and no SD card, my pbp goes into maskrom mode, doesn't matter if I use the recovery button or not. I can't seem to do anything in this state, I can't even reset it:
Code:
matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool ld DevNo=1 Vid=0x2207,Pid=0x330c,LocationID=102    Maskrom matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool rid Reading flash ID failed! matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool rci Read Chip Info failed! matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool rfi Read Flash Info failed! matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool db rk3399_usbplug_v1.19.bin   Opening loader failed, exiting download boot! matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo rkdeveloptool rd Reset Device failed!
If I insert my 16G Samsung uSD card, boot it and execute `reboot loader`, it gets into loader mode, but then the only thing it sees is the uSD:
Code:
matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool ld DevNo=1 Vid=0x2207,Pid=0x330c,LocationID=102    Loader matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool rci Chip Info:  43 30 33 33 0 0 0 0 0 0 0 0 30 30 31 56 matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool rid Flash ID: 45 4D 4D 43 20 matega@neofelisnebulosa:~/build/rkdeveloptool$ sudo ./rkdeveloptool rfi Flash Info:        Manufacturer: SAMSUNG, value=00        Flash Size: 14992 MB        Block Size: 512 KB        Page Size: 2 KB        ECC Bits: 0        Access Time: 40        Flash CS: Flash<0>
I've tried swapping and switching the eMMC multiple times, I'll make some more tries but I'm fairly confident I toggled the switch correctly Smile The USB adapter might as well have disintegrated, I can't find it anywhere.


Messages In This Thread
Fried eMMC? - by matega - 01-15-2020, 03:25 PM
RE: Fried eMMC? - by belfastraven - 01-15-2020, 06:48 PM
RE: Fried eMMC? - by matega - 01-16-2020, 12:59 AM
RE: Fried eMMC? - by belfastraven - 01-16-2020, 01:59 PM
RE: Fried eMMC? - by matega - 01-17-2020, 08:03 AM
RE: Fried eMMC? - by belfastraven - 01-18-2020, 04:33 PM
RE: Fried eMMC? - by matega - 01-28-2020, 06:47 AM
RE: Fried eMMC? - by matega - 01-28-2020, 07:53 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
Sad What to can't boot from TF card, EMMC system broken - any advice?do guys? qingss0 1 2,447 12-18-2025, 01:05 AM
Last Post: qingss0
  swap eMMC advice jceaser 2 2,772 10-23-2025, 09:59 PM
Last Post: Der Geist der Maschine
  Need new eMMC Karsten1 2 4,943 10-23-2025, 09:38 AM
Last Post: jceaser
  Happy eMMC and SDcard OS usage for Pinebook Pro Newbies... Paulie420 42 106,888 11-20-2023, 06:22 PM
Last Post: wdt
  I'm booting from NVME but I want to switch back to eMMC acruhl 4 6,804 04-23-2023, 06:58 AM
Last Post: acruhl
  Doesn’t power on after flashing emmc badguru 3 5,573 02-25-2023, 09:00 PM
Last Post: badguru
  eMMC problem with Tow-Boot/u-boot on SPI repa 3 5,913 02-21-2023, 01:49 AM
Last Post: repa
  Partial boot after installing Manjaro on emmc regivanx 11 12,710 02-06-2023, 09:11 AM
Last Post: wdt
  Unable to Boot anything (emmc or SDcard) line72 5 7,384 01-17-2023, 12:07 PM
Last Post: nfms
  What OS have you recently flashed onto PBP eMMC? jcun4128 6 7,811 11-26-2022, 09:39 AM
Last Post: KC9UDX

Forum Jump:


Users browsing this thread: 1 Guest(s)