01-02-2020, 12:50 PM
It does fit, but it requires some folding. What I did was attached the ribbon cable to the 2 boards, then loosely started the 3 screws to retain the adapter board. Once the screws were started, I held the "fold" of the ribbon cable as I tightened the screws down.
Be mindful, that with the current adapter board, use of 80mm drives will require modifications, whereas 60 and 42mm drives do not.
Be mindful, that with the current adapter board, use of 80mm drives will require modifications, whereas 60 and 42mm drives do not.
