NVMe SSD adapter installation instructions?
*
See thread ' Pro NVMe adapter Does not fit '
Post number 73 by wizzard, excellent picture of an SSD installed.
Notice the spacer that holds the ssd, this is the piece that hits the touch pad on a full sized ssd on an un-cut adapter board.
Using the short ssd is a simpler 'fix'
Also note:
There are several other alternate methods, if you look around a bit.
Another, cut the adapter board and held a full sized module in place using a cable tie.
Also it is necessary to attach the module to the adapter board FIRST 'IF' you do use the Spacer to attach the module to the adapter. !
the silver screw goes thru the adapter board into the spacer, the modules seats into the groove of the spacer.
See thread ' Pro NVMe adapter Does not fit '
Post number 73 by wizzard, excellent picture of an SSD installed.
Notice the spacer that holds the ssd, this is the piece that hits the touch pad on a full sized ssd on an un-cut adapter board.
Using the short ssd is a simpler 'fix'
Also note:
There are several other alternate methods, if you look around a bit.
Another, cut the adapter board and held a full sized module in place using a cable tie.
Also it is necessary to attach the module to the adapter board FIRST 'IF' you do use the Spacer to attach the module to the adapter. !
the silver screw goes thru the adapter board into the spacer, the modules seats into the groove of the spacer.
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
**BCnAZ**
Donate to $upport
your favorite OS Team
