EFIFY
So, Would the SPI be flashed with the first sd card to install the correct firmware so it will "Look" for the NVMe drive ?
and then use a second sd card to install the operating system to the NVMe drive ?
Ideally, if you are in 'Live' mode on the sd card, it 'could be possible' to just have it start and install with one card, but I do not know if that option is open at this time.. ?
( or, use the sd card as the boot media which directs it to the NVMe, but that would require keeping the sd card installed ? )
( But no bricking the board then ? )
I have read many of your posts, so if you tell me it cannot be done, or cannot be done yet, I can accept that.
Thanks
So, Would the SPI be flashed with the first sd card to install the correct firmware so it will "Look" for the NVMe drive ?
and then use a second sd card to install the operating system to the NVMe drive ?
Ideally, if you are in 'Live' mode on the sd card, it 'could be possible' to just have it start and install with one card, but I do not know if that option is open at this time.. ?
( or, use the sd card as the boot media which directs it to the NVMe, but that would require keeping the sd card installed ? )
( But no bricking the board then ? )
I have read many of your posts, so if you tell me it cannot be done, or cannot be done yet, I can accept that.
Thanks
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
**BCnAZ**
Donate to $upport
your favorite OS Team