Pro NVMe adapter Does not fit ! ?

[bcnaz]

***********************

    Hello,  Luke,  TLLIM,   or  ??

          We seem to have a clearance problem with the M.2 NVMe  adapter  and card not quite fitting into the allotted space.
 
  ! !    It is hitting the underside of the touch pad.
      *         Causes the touch pad to lift out of place when the cover is closed
      *          And the touch pad to not respond properly.

      >  I have replied to the persons that experienced the problem over at the first impressions thread.
      >   I made a few suggestions to them on possible fixes,

      *      but   it may be better with some official intervention ?

       After thinking about it,  I figured this should have its own thread  ? 
       Though if those sound like acceptable solutions, 
          maybe you (Admin) could move my previous posts those over here  ?


          Is there a "Factory Approved"  solution  ?

        I have already received my adapter,  waiting on my own PBP.

                            ************************

A small NVMe SSD, M.2 2242 (42mm) will do the trick?

****
>>>
*  IF     it is indeed a NVMe dive,  it should "work", **  BUT It would likely use 2 of the 4 available lanes...
and would still be faster than the eMMC drive...    >>>   but I was thinking most of the 2242mm drives are sata.
 
  Sata would not be compatible with the PCIe