09-02-2018, 01:03 AM
(08-31-2018, 07:21 AM)Luke Wrote: I've written up a pretty detailed wiki entry for the NAS Case. Anyone willing to contribute, edit or correct please do so: http://wiki.pine64.org/index.php/NASCase
Just received my case today. The SATA cables supplied with the case are not a very good fit - they don't look like the ones in your case photos above.
There is very little space between the top of the case and the dual SATA interface card. I received SATA cables with connectors that don't fit in the given space. Angled connectors are available. I see they are available at Walmart.com. This picture shows angled connector available at Walmart:
https://drive.google.com/file/d/1oy2nv39...sp=sharing
This next picture shows straight connectors. The black cable was received with the Rockpro64 case and has the largest connector. The red cable is an old cable I rescued from an old PC. It has a smaller connector similar to the ones shown in your photos: https://drive.google.com/file/d/1vMihAnr...sp=sharing
As an aside, instead of the two cables normally accompanying the case, they packaged three SATA cables. But one of the included cables had a broken connector.
