Yesterday, 06:40 PM
(This post was last modified: Yesterday, 06:46 PM by Dendrocalamus64.)
Nope!
It worked last night and it worked this morning, now it's back to dropping out in the same places again.
$ pulseaudio -vv --log-time=TRUE
And on for many lines.
The active sink seems to just die and the debug-level messages only show what happens after that.
You know it's a bad sign when the "PulseAudio/Troubleshooting" page is one of the longest ones on Arch wiki.
It worked last night and it worked this morning, now it's back to dropping out in the same places again.
$ pulseaudio -vv --log-time=TRUE
Code:
( 54.449| 7.474) D: [pulseaudio] module-alsa-card.c: Jack 'Headphones Jack' is now plugged in <-- this is the first thing it says when it happens. I am not using the headphone jack.
( 54.449| 0.000) D: [pulseaudio] device-port.c: Setting port [Out] Speaker to status no
( 54.449| 0.000) I: [pulseaudio] core.c: default_sink: alsa_output.platform-es8316-sound.HiFi__Speaker__sink -> alsa_output.platform-snd_aloop.0.analog-stereo
( 54.449| 0.000) I: [pulseaudio] sink.c: The sink input 0 "mpv Media Player" is moving to alsa_output.platform-snd_aloop.0.analog-stereo due to change of the default sink.
( 54.449| 0.000) D: [pulseaudio] sink-input.c: Starting to move sink input 0 from 'alsa_output.platform-es8316-sound.HiFi__Speaker__sink'
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] sink.c: Requesting rewind due to started move
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: hwbuf_unused=0
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: setting avail_min=87319
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] sink.c: Volume not changing
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: Requested to rewind 10584 bytes.
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: Limited to 10136 bytes.
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: before: 2534
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: after: 2534
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] alsa-sink.c: Rewound 10136 bytes.
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] sink.c: Processing rewind...
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] sink.c: latency = 1294
( 54.450| 0.000) D: [alsa-sink-ff890000.i2s-ES8316 HiFi ES8316 HiFi-0] source.c: Processing rewind...
( 54.450| 0.000) D: [pulseaudio] sink.c: alsa_output.platform-es8316-sound.HiFi__Speaker__sink: state: RUNNING -> IDLEAnd on for many lines.
The active sink seems to just die and the debug-level messages only show what happens after that.
You know it's a bad sign when the "PulseAudio/Troubleshooting" page is one of the longest ones on Arch wiki.
