12-25-2021, 08:43 AM
Hello,
it seems that the PineTime currently is not conforming to EU regulations. It's a pity because all that is missing is probably just a bit of paperwork. Do you think there is a way to contact Pine Microsystems Inc. and help them reach the last 5% that are currently missing to reach CE conformity?
Background: I had ordered a PineTime DevKit to Germany. It never reached me because customs had complaints about conformity. I had contacted sales, but so far I do not yet see a way forward, either to get a "fixed" DevKit or getting my money back. I would clearly prefer to get the DevKit.
What is needed to get EU conformity: There is a "CE" sticker on the manual, but that is not enough. As far as I understand it, you need a CE label on the device, probably both on the watch and the charger. In addition to the "CE", there needs to be a declaration for identification (type or similar) and declaration of the manufacturer. Something like:
CE
Manufacturer: Pine Microsystems Inc
Type: PineTime Charger v1.0
And there should be piece of paper included in the package, that is called declaration of conformity, and it needs to clearly identify the vendor, the watch and list the standards, probably
Safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Health: EN62479:2010
EMC: ETSI EN 301 489-1 V2.1.1 (2017-02), ETSI EN 301 489-17 V3.1.1 (2017-02)
Radio: ETSI EN 300 328 V2.1.1 (2016-11)
The standards are what I got from sales, but from a verification of conformity, not from a declaration of conformity. And it did not not clearly refer to the PineTime. And It was not included in the package.
I know that EU bureaucracy can be very annoying, but improving PineTime paperwork would make a huge difference in user experience. As I said, customs did not let the watch through to me. With 4 additional labels and 1 piece of paper in the PineTime DevKit, I would probably be playing with my brandnew swartwatch now.
Best regards
pt1
it seems that the PineTime currently is not conforming to EU regulations. It's a pity because all that is missing is probably just a bit of paperwork. Do you think there is a way to contact Pine Microsystems Inc. and help them reach the last 5% that are currently missing to reach CE conformity?
Background: I had ordered a PineTime DevKit to Germany. It never reached me because customs had complaints about conformity. I had contacted sales, but so far I do not yet see a way forward, either to get a "fixed" DevKit or getting my money back. I would clearly prefer to get the DevKit.
What is needed to get EU conformity: There is a "CE" sticker on the manual, but that is not enough. As far as I understand it, you need a CE label on the device, probably both on the watch and the charger. In addition to the "CE", there needs to be a declaration for identification (type or similar) and declaration of the manufacturer. Something like:
CE
Manufacturer: Pine Microsystems Inc
Type: PineTime Charger v1.0
And there should be piece of paper included in the package, that is called declaration of conformity, and it needs to clearly identify the vendor, the watch and list the standards, probably
Safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Health: EN62479:2010
EMC: ETSI EN 301 489-1 V2.1.1 (2017-02), ETSI EN 301 489-17 V3.1.1 (2017-02)
Radio: ETSI EN 300 328 V2.1.1 (2016-11)
The standards are what I got from sales, but from a verification of conformity, not from a declaration of conformity. And it did not not clearly refer to the PineTime. And It was not included in the package.
I know that EU bureaucracy can be very annoying, but improving PineTime paperwork would make a huge difference in user experience. As I said, customs did not let the watch through to me. With 4 additional labels and 1 piece of paper in the PineTime DevKit, I would probably be playing with my brandnew swartwatch now.
Best regards
pt1