Hello pinephone thread,
I'll probably be searching on that problem for a while, but I case someone can help, I'll post here first.

After having using a mmcli command that was meant to reboot the modem manually, I lost the ability to make or receive call. This is, what I suspect to be the cause, but it can be due to other factors, like hardware failure or carrier blacklisting me.

Among important symptoms that I can mentions are:
- I do can send/receive sms
- But I can't call/receive calls.
- Cell tower is fully detected.
- When my sim card is inserted in pinephone, people who try to call me, are unable to leave a message on my voice mail box, as if my carrier was thinking that my pinephone was answering, thus not activating the voice mail.
- On the other hand, when sim card is inserted in android, I can call/receive call, and people can leave messages on voice mail box.
- The problem persist after installing a fresh distro, as well as an upgraded one.

Hi everyone, I'm Paolo and I'm Italian and sorry for my English, I wanted to install Home Assistant Supervisor on the rock64 with 4gb of ram but all my attempts failed; could someone kindly help me figure out which version of linux to install and what other steps I need to take to install it? i tried to use Armbian_21.05.1_Rock64_buster_current_5.10.35.img but then when i proceed with this:
1) sudo apt-get update && sudo apt-get upgrade -y
2) sudo apt-get install jq wget curl avahi-daemon udisks2 libglib2.0-bin network-manager dbus apparmor -y
3) sudo apt --fix-broken install
4) sudo reboot
5) curl -fsSL get.docker.com | sh
6) wget https://github.com/home-assistant/os-age..._armv7.deb
here is the error ....
7) sudo dpkg -i os-agent_1.2.2_linux_armv7.deb

thanks to those who can help me 

Hello.

Here is my solution to make Pinecil work with 24V power supply. Simple over voltage protection with 1k resistor and 20v zener diode.

       

I have been running Mobian bookworm Phosh on my pinephone. Lately, when updating by using the software update under settings I have been receiving the message "unable to install updates. Prepared update not found: /var/lib/PackageKit/prepared-update". I also tried to update using the terminal and sudo apt update followed by sudo apt install. No luck. Am I missing something? In the past Mobian would post updates every week and the updater under settings worked great. Any help or ideas would be appreciated. Thanks

While i was searching for the linux bsp/sdk i saw a sdk for android 12 , so after downloading the 80G of the rk android 11 sdk and comparing
i saw that i got the android 12 rk sdk , so after removing the vendor and adding a quartz64 dts to the rk3566_s , got it compiling and to my surprise it is booting.

# SDK Version
PRODUCT_PROPERTY_OVERRIDES += \
    ro.rksdk.version=ANDROID$(PLATFORM_VERSION)_RKR1


the test in the calculator works (same codes as in android 11 000.= and the 839...) , the videoplayer (not the mediaplayer) plays video , sound i dont know (no speakers ) ,wifi works , bluetooth ?
and not much more it , i have no experience with building android , limo was the last time .


i only post a image wich you can flash with rkdevtool on a emmc !!!

NO POST OF SOURCES ( i dont know how public the source is ,proberly not (think a dev didn't got his setting in git right) compared to the custom linux sdk wich you can find public). and dont see a vendor with android 12 on their devices while there is a sdk for android12 since november last year .

i noticed the codecs are diffrent comapred to android 11 codecs .

so have fun whith the little custom preview

 
https://drive.google.com/file/d/1uPbpYv4...sp=sharing

If I understand correctly there is already an Android 11 eink SDK for Quartz64 model A that is compatible with the eink.com 10.3" eink panel.
So I will first go for that. But I was wondering if it would be possible to connect one of this eink displays:

https://www.good-display.com/product/385.html

Actually has the same pin up 40 pins FPC connector. But another Waveform and it has a color filter always on so I guess the resolution is downgraded 3x using color.
I've one of this lying in my studio since months and I could never control it yet since there is no controller yet from Good display. There is only a tablet being sold commercially that is called Reinkstone with the display.

On another topic, I would like to ask if there are any other pointers on how the Eink interface works?
I would love to read about people doing stuff with this, on how the Android version works, refresh rate etc. I've only tried a Hisense eink phone and I'm quite impressed with the refresh rate and usability on UX since I expected it to be much slower. At the same time I'm a bit dissapointed on how color works since it's always a bit pale and frontlight does not help much.

Looking forward buying my first Model A board in the following weeks and start exploring it's possibilities. I'm quite impressed with it so far and it's very cool to see people trying it and the video reviews about them (Some playing games at an impressive framerate)

Hi, I've made an attempt at writing the daemon Megi described in his blog post about the keyboard case. It's gone well enough that I thought it was time to share. Initially it only worked on the Pinephone Pro, however I've just released a version (0.1.2) that works on both the PP and the PPP.

https://github.com/estokes/pinephone-kbpwrd

The focus is on maximizing efficiency by avoiding moving charge into the main battery where possible. I'm open to discussion, and especially feedback and data.

Hello there,

is anyone else facing DNS problems using mobile data after the latest Network Manager update to v1.35.91-1?

I can ping 8.8.4.4 for example but opening a homepage in a browser is not working.

No problems with Wifi though...

Thanks in advance!

I am having some problems with a mobian isntall I did today, when tryting to open megapixels I get this error:

What are system bootup dependencies on /tmp?

I've tried switching /tmp to be a ramdisk on PMOS and Mobian.  PMOS boots into console (no phosh) and Mobian won't boot at all.

Perhaps my /etc/fstab syntax is wrong?? 

(02-19-2022, 11:51 AM)vap0rtranz Wrote: What are system bootup dependencies on /tmp?

I've tried switching /tmp to be a ramdisk on PMOS and Mobian.  PMOS boots into console (no phosh) and Mobian won't boot at all.

Perhaps my /etc/fstab syntax is wrong?? 

Code:

tmpfs /tmp tmpfs rw,nosuid,nodev,size=613392k,mode=755 0 2

(Why switch /tmp from filesystem to ramdisk?  /tmp is the default BURST_DIR for Megapixels, and for Pure Maps cache;  so a ramdisk should make taking pics & viewing maps faster.  Everyone could benefit