The Wiki says:  "IR receiver (no need to staff IR connector, just reserved 3 pin connectors Vcc, CIR_RX, Gnd)  
What does this mean?   Is a IR receiver built into Pine A64?   Is any additional wiring or modification required to be made to the Pine A64 to be able to use the IR remote control with the Pine A64?

I looked at the schematic but it doesn't clear up the confusion. 

hrh1818

I'm wondering if it might eventually be possible to have Pine64 with GitLab installed on it. They currently have a version for Raspbian Wheezy (https://about.gitlab.com/downloads/)

Hi,

I noticed with the 2GB addon that it says 'light assembly required'. Does anyone know what this will entail? Will this mean soldering is required or just plug in and go?

Please refer to the wiki at http://wiki.pine64.org/index.php/Main_Pa...nformation for the Pine A64 1GB Ram version schematic.

I've got my order in with the kick starter.

I've even downloaded the image from the wiki. 

What I've never done before is add a hardware image to the AVD Emulator. I'd like to be able to do this as my A64 isn't gong to ship until April. I've gotten as far as subjecting the archive to 7-Zip. the .img file therein it claims is corrupted.

I gotta believe this has been done before but I didn't see it. Can someone throw me a pointer? 

I assume it's going to result in files that go under the system-images/android-22 directory. I just need to get to that point.

Thanks in advance

Hi all! This is literally my first post here on the Pine forum, so I apologize if it's not in the right section.

I am having some trouble figuring out what I'm getting from my base pledge vs. what it says on BackerKit. I pledged for the "$89 Pine A64+ Bow w/ Touch Screen" on Kickstarter. According to the Kickstarter reward description, I am supposed to be getting the following: 

• PINE A64+ 1GB unit along with 64GB MicroSD Pre-Loaded with Android 5.1 OS
  
• 802.11N Wifi + Bluetooth 4.0
  
• PINE64 Power Supply
  
• 7" LCD touchscreen panel
  
• the PINE64 Enclosure
  
• 2GB upgrade available for $10 later.
  

   

• 1 64GB MicroSD Android (This is clear . . . a 64GB MicroSD that's pre-loaded with Android.)
  
• 1 7" LCD Touch Screen (This is clear . . . I get the touch screen.)
  
• 1 PINE64 ABS PlayBox Enclosure (This is not clear. I see that there's a PlayBox enclosure that seems to hold the screen, PINE64, and battery. So does this mean that I won't be getting the clear PINE64 enclosure mentioned above that was shown during the campaign? Or will I be getting both the PlayBox AND the clear enclosure?)
  
• 1 PINE 64 USA Power Supply (This is clear . . . getting a USA power supply cord.)
  
• 1 802.11BGN  Wifi/BT 4.0 Module (This is clear . . . getting the wifi/Bluetooth 4.0 module)
  
• 1 PlayBox Kit (This is not clear . . . there is no mention of a PlayBox Kit on BackerKit. It can't be the same thing as the PlayBox Enclosure listed above. There's a "Media Kit" listed in BackerKit, but I can't assume that they're the same thing. So what is this PlayBox Kit and which components does it include?)
  
• 1 PINE A64+2GB (This is clear . . . This is my PINE with the 2gb upgrade.)
  

   

So can anyone here clarify the points in red above? I'd like to know what those things mean before adding in extra add-ons. As as said, I'd hate to order doubles of anything I'm already getting. Thanks in advance to anyone who can provide me with some sure answers! 

If I get the dimensions for the connections, I'll offer this housing at Shapeways. Variants for the different extension parts are then also feasible.

   

Well, you wanted images - here we go. If you are brave you can run Linux on your Pine64 now. **This image is intended for developers. If you are looking for accelerated 2D/3D or video decoding use Android** and do not bother with trying this image.

Important: I will not provide any further releases to the this Arch image. If you use this image, the Kernel and U-Boot update script will continue to work but you will not benefit from any packaging stuff i do for Ubuntu. Consider to change to my Ubuntu 16.04 Xenial Xerus releases.

What you get:

- HDMI at 1080p with 60Hz
- Ethernet (100M only including 1000M)
- USB
- Wifi
- Arch Linux aarch64
- BSP Linux Kernel 3.10.65+ (see http://forum.pine64.org/showthread.php?tid=293)
- BSP U-Boot (see http://forum.pine64.org/showthread.php?tid=99)
- Support for all Pine64 models (512MB, 1GB, 2GB) with auto detection so Ethernet works with the same image on all models

It actually works good enough so i feel i can publish it.  While the image is quite minimal, you can install all the software from the Arch Linux aarch64 repository including X11 and Xfce.

Screenshots

Download (for instructions see README.txt)


History:

**20160221-2**
- Initial public release
- Known issue: Ethernet hardcoded to use 100M only
- Known issue: Firefox crashes
- Known issue: Audio does not work (Inappropriate ioctl for device)
- Known issue: Kernel is entered in EL1

**20160227-1**
- Ethernet now supports 1000M
- Kernel is now entered in EL2, means the hypervisor works (tested with KVM)
- Disk size was reduced to 3700MiB so it fits on 4GB media

**20160304-1**
- Kernel updated to 20160304-1.
- Device tree was updated to improve thermal throttling and Ethernet 1000M speed and compatibility.

**20160308-1**
- Updated U-Boot and device tree to 20160306-1
- Updated Kernel to 3.10.65-2-pine64-longsleep-39-1
- Ethernet MAC address is now persistent (added to uEnv.txt on first boot)
- Added system service to reenable CPU cores
- Added helper Pine64 platform scripts to /usr/local/sbin
- Linux Kernel firmware and headers are now installed

**20160403-1**
- Updated Kernel to 3.10.65-4-pine64-longsleep-16 (fixing Pine64+ 2GB model Ethernet crash)


Released images are signed with a detached GPG signature (.asc) signed by my personal key 0x090EF0DB. Get the key and verify that the download is intact and unmodified.

Hi,

When can we expect to see the 3D printer files for the enclosures, Id like to have mine printed by the time we receive our pledges.

Regards

Cotillion

Hi, I was about to finish the kickstarter survey, but I thought it was a good idea to first ask some stuff in this forum. Here go my requirements:

I want my Pine64 to connect to a HD that is plugged to my Asus  rt-ac68u home router via USB. The router is sharing files on the HD via SMB. It has the option to enable the DLNA server, but that does not seem to be working because I can't see it as a media server on the BubblePnP app for example.
I would like to use my android phone to control the Pine64 and stream video files (mp4, mkv, avi, etc) to my TV via HDMI.

I'd like my Pine64 to draw power from the TV via USB. 
I would like to use WiFi rather than a physical ethernet cable.
Also, I'd like to use my Pine64 to stream audio to an old stereo system via its AUX port (like chromecast audio would do).

Should I just add an enclosure, the wifi module and the 3.5 mm audio jack?
Do I need to include a microSD for them to install android on it or will android be installed in a different media that is included by default?

I will appreciate it if you guys, which are obviously more experienced than I in these matters, validate my idea.
Thanks!