[April 06] Volumio (2.390-2018-03-27) ROCK64 | [April 06] Q4OS (2.4-r3) PINE A64(+) Pinebook | [Jan 06] Arch Linux (20171225-1) PINE A64(+) Pinebook A64-LTS/SOPINE | [Jan 04] Linux (0.5.15-136) ROCK64 | [Jan 04] Android (20171204) ROCK64 | [Dec 22] Stretch Mate (0.5.15-136-20171222) ROCK64 | [Dec 21] openHAB 2 (v1.4) PINE A64(+)

Project Inspiration | Get Started | IRC Logs | Forum Rules/Policy


Won't power on/boot -- kickstarter A64 2GB
#1
Kickstarter backer, finally getting to playing with my A64+ 2gb

Using the new Etcher image burner on a Transcend 300x 16gb card UHS-1

No matter what image I use (Android, Linux, RemixOS, etc.), won't boot.

Power supply is a 5V 2.5A power supply I use with my Raspberry Pi 3 which works fine

Symptoms:

Red LED works/on when USB power is plugged in
HDMI out makes the monitor turn on, then off because 'no signal is detected', turns back on, turn off no signal -- keeps repeating

I'm unsure if this is power supply, memory card, or simply bunk A64 related.

Any help?
Reply
#2
(09-22-2017, 02:09 PM)fuzzycuffs Wrote: Kickstarter backer, finally getting to playing with my A64+ 2gb

Using the new Etcher image burner on a Transcend 300x 16gb card UHS-1

No matter what image I use (Android, Linux, RemixOS, etc.), won't boot.

Power supply is a 5V 2.5A power supply I use with my Raspberry Pi 3 which works fine

Symptoms:

Red LED works/on when USB power is plugged in
HDMI out makes the monitor turn on, then off because 'no signal is detected', turns back on, turn off no signal -- keeps repeating

I'm unsure if this is power supply, memory card, or simply bunk A64 related.

Any help?
I have the same issue. Did you get this resolved?
Reply
#3
(04-15-2018, 11:13 PM)GaryFunk Wrote:
(09-22-2017, 02:09 PM)fuzzycuffs Wrote: Kickstarter backer, finally getting to playing with my A64+ 2gb

Using the new Etcher image burner on a Transcend 300x 16gb card UHS-1

No matter what image I use (Android, Linux, RemixOS, etc.), won't boot.

Power supply is a 5V 2.5A power supply I use with my Raspberry Pi 3 which works fine

Symptoms:

Red LED works/on when USB power is plugged in
HDMI out makes the monitor turn on, then off because 'no signal is detected', turns back on, turn off no signal -- keeps repeating

I'm unsure if this is power supply, memory card, or simply bunk A64 related.

Any help?
I have the same issue.  Did you get this resolved?
in general, mostly due to power supply (make sure is 5V 2A, don't use smartphone charger) and microSD card preparation.

Please review the wiki NOOB section: http://wiki.pine64.org/index.php/NOOB
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Problems with Kickstarter Pledge danphuong34k 1 216 12-27-2017, 04:05 PM
Last Post: Wizardknight
  Will the Pine64 boot from a USB Flash drive? MrUmunhum 11 2,506 11-14-2017, 12:09 PM
Last Post: marcelser
  short boot time after power-up bongo 7 249 10-31-2017, 08:02 AM
Last Post: bongo
  PINE64/ROCK64 infra receiver power on cserem 1 226 10-06-2017, 07:25 AM
Last Post: MarkHaysHarris777
  No boot-up . Initializing SDRAM fail . Siim 1 142 09-27-2017, 04:20 PM
Last Post: dkryder
  Power supply questions montero65 36 3,358 08-15-2017, 03:51 AM
Last Post: tllim
  Pine64(+) will not boot pgarvey 2 268 08-06-2017, 12:38 AM
Last Post: pfeerick
Lightbulb Co-Pine-ON, Boot co-processor assistant ecolezen 4 241 06-26-2017, 10:12 PM
Last Post: pfeerick
  [Solved] Boot Issues dedseason 9 687 06-08-2017, 08:21 PM
Last Post: MarkHaysHarris777
  Pine A64+ 2GB can´t boot elTorres 4 679 03-30-2017, 01:43 AM
Last Post: elTorres

Forum Jump:


Users browsing this thread: 1 Guest(s)