+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: General Discussion on PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=3)
+--- Thread: Won't power on/boot -- kickstarter A64 2GB (/showthread.php?tid=5161)
Won't power on/boot -- kickstarter A64 2GB - fuzzycuffs - 09-22-2017
Kickstarter backer, finally getting to playing with my A64+ 2gb
Using the new Etcher image burner on a Transcend 300x 16gb card UHS-1
No matter what image I use (Android, Linux, RemixOS, etc.), won't boot.
Power supply is a 5V 2.5A power supply I use with my Raspberry Pi 3 which works fine
Symptoms:
Red LED works/on when USB power is plugged in
HDMI out makes the monitor turn on, then off because 'no signal is detected', turns back on, turn off no signal -- keeps repeating
I'm unsure if this is power supply, memory card, or simply bunk A64 related.
Any help?
RE: Won't power on/boot -- kickstarter A64 2GB - GaryFunk - 04-15-2018
(09-22-2017, 02:09 PM)fuzzycuffs Wrote: Kickstarter backer, finally getting to playing with my A64+ 2gbI have the same issue. Did you get this resolved?
Using the new Etcher image burner on a Transcend 300x 16gb card UHS-1
No matter what image I use (Android, Linux, RemixOS, etc.), won't boot.
Power supply is a 5V 2.5A power supply I use with my Raspberry Pi 3 which works fine
Symptoms:
Red LED works/on when USB power is plugged in
HDMI out makes the monitor turn on, then off because 'no signal is detected', turns back on, turn off no signal -- keeps repeating
I'm unsure if this is power supply, memory card, or simply bunk A64 related.
Any help?
RE: Won't power on/boot -- kickstarter A64 2GB - tllim - 04-19-2018
(04-15-2018, 11:13 PM)GaryFunk Wrote:in general, mostly due to power supply (make sure is 5V 2A, don't use smartphone charger) and microSD card preparation.(09-22-2017, 02:09 PM)fuzzycuffs Wrote: Kickstarter backer, finally getting to playing with my A64+ 2gbI have the same issue. Did you get this resolved?
Using the new Etcher image burner on a Transcend 300x 16gb card UHS-1
No matter what image I use (Android, Linux, RemixOS, etc.), won't boot.
Power supply is a 5V 2.5A power supply I use with my Raspberry Pi 3 which works fine
Symptoms:
Red LED works/on when USB power is plugged in
HDMI out makes the monitor turn on, then off because 'no signal is detected', turns back on, turn off no signal -- keeps repeating
I'm unsure if this is power supply, memory card, or simply bunk A64 related.
Any help?
Please review the wiki NOOB section: http://wiki.pine64.org/index.php/NOOB
Won't power on/boot -- kickstarter A64 2GB - GaryFunk - 02-22-2019
Issue resolved.