07-26-2020, 06:48 AM
I decided it would be good to have some kind of case, and naturally there are none sleeves on the market that are bespoke for the PBP.
So I looked around and decided to take the gamble with a case for the MacBook Air 2017 13.3" based on the dimensions.
It fits well enough as you can see from the photos.
It's a sleeve that leaves the ports available on both sides, the corners of the screen just fit enough to not come out, so it works fine.
On the bottom side it has loads of holes for the exhaust of the MacBook I presume, but for the PBP that's not required.
So now I can just drop my PBP in my backpack without worrying.
I also got a couple of USB to 3.5mm barrel cables to charge, important is to get the type with the correct inner diameter for the barrel port, I've seen different sizes posted. Also, not all USB chargers supply the maximum current.
So I looked around and decided to take the gamble with a case for the MacBook Air 2017 13.3" based on the dimensions.
It fits well enough as you can see from the photos.
It's a sleeve that leaves the ports available on both sides, the corners of the screen just fit enough to not come out, so it works fine.
On the bottom side it has loads of holes for the exhaust of the MacBook I presume, but for the PBP that's not required.
So now I can just drop my PBP in my backpack without worrying.
I also got a couple of USB to 3.5mm barrel cables to charge, important is to get the type with the correct inner diameter for the barrel port, I've seen different sizes posted. Also, not all USB chargers supply the maximum current.
