Micro SD card slot problem
#1
Yesterday I noticed that my micro SD card slot does not hold the micro SD card inside. When I insert the card, it does not stay inside and it is ejected outside. Seems like some holding mechanism is broken. What to do now? I do not need SD card now, but what if I wanted to boot another OS?
#2
Last I checked, the small board, (which has the SD card slot), was not available from the Pine Store as a spare part.

Are you sure the spring part has failed?

I have to use a finger nail, (which I do have ones both strong enough and long enough), to push in a Micro SD card
until it clicks in place. (Or reverse, to eject it.)
--
Arwen Evenstar
Princess of Rivendale
#3
It must be some hardware failure, because before it was working fine, but a few days ago I had to insert the microSD card deeper into hole to click and now it does not click at all even if it is very deep. Something must be broken there.
#4
(07-09-2020, 01:30 PM)Wizzard Wrote: It must be some hardware failure, because before it was working fine, but a few days ago I had to insert the microSD card deeper into hole to click and now it does not click at all even if it is very deep. Something must be broken there.

Maybe :  a short burst from a  'canned air'  may clean it out ?
                possibly something got into the slot... ?
#5
I have found a better way to install or remove micro SD cards from the machine. The very small eye glass screwdriver that comes with or can be purchased separately for Victorinox Swiss army knifes. The screwdriver rests in the corkscrew when not in use. I have launched the SD card across the room many times when using my finger nails.
#6
If your card slot truly is damaged, you can always boot other OS images from USB. You can even use existing microSD cards in the USB slot with an adaptor (slower, but it works),
#7
Have you tried it? I never booted any OS from USB, it is just not supported.
#8
(07-11-2020, 12:36 PM)Wizzard Wrote: Have you tried it? I never booted any OS from USB, it is just not supported.
At least with the mainline u-boot installed, USB booting works fine.  I hosed my Manjaro install the second day I had my PBP and had to boot from USB (my SD card hadn't arrived from Amazon yet)
#9
I will try it, but it really never worked for me. I have the latest uboot for direct booting from NVMe.
#10
Ok, sorry, everybody, I was wrong, my uboot really supports booting from USB already, so it is not so bad, I can still run and install another OS Smile
I successfully booted the same Ubungtu OS from left USB.


Possibly Related Threads…
Thread Author Replies Views Last Post
  uboot wont boot to SD card after upgrade jbradley419 7 2,316 01-19-2024, 02:29 PM
Last Post: wdt
  Cannot boot to Kali SD card after uboot upgrade jbradley419 4 1,946 09-19-2023, 08:48 AM
Last Post: dachalife
  eMMC problem with Tow-Boot/u-boot on SPI repa 3 2,346 02-21-2023, 01:49 AM
Last Post: repa
  Cannot Boot From SD Card xp19375 4 4,073 11-12-2022, 11:26 AM
Last Post: KC9UDX
  Can't boot when SD card inserted 0daysfordays 3 2,444 09-17-2022, 06:59 PM
Last Post: wdt
  Problem SD card willahughes 1 1,999 03-22-2022, 09:27 AM
Last Post: jiyong
  Kali Linux on SD card boot wils91 5 5,330 03-08-2022, 04:39 AM
Last Post: Tazdevl
  very strange .pptx highlight color problem stozi 0 1,387 09-02-2021, 02:50 PM
Last Post: stozi
Tongue Hello my frend. How to fix my boot problem? carinosa 6 6,508 07-04-2021, 04:01 AM
Last Post: jiyong
  cannot boot SD card : "unable to select a mode" alchemist 0 2,476 06-18-2021, 02:03 AM
Last Post: alchemist

Forum Jump:


Users browsing this thread: 1 Guest(s)