NAS Box - fdisk not showing hard-drives w/pcie sata card

[dkebler]

Just getting my new pine64 NAS box up and running.
I've got the ayufan latest stable image loaded and running no issues (18.04 ubuntu).
I have the pcie sata card I bought from pine64.
I have them connected to two 3.5" Hitachi drives
The drives are powered and I did see a momentary light flash on the card but when I do a fdisk -L neither drive is listed.

Given all the hardware looks good does the ayufan built kernel not include that pcie board?

Why can't I see these drives?

---

hmm.   if I just cat dev/disks/by-id   I see them sda/sbd

Well something changed after a reboot I see the drives with fdisk now so ......nevermind

Code:

rock64@rockpro64:/dev/disk/by-id$ ll
total 0
drwxr-xr-x 2 root root 280 Oct 12 17:17 ./
drwxr-xr-x 8 root root 160 Jan 18  2013 ../
lrwxrwxrwx 1 root root   9 Oct 12 17:17 ata-Hitachi_HUA723020ALA641_YFGPRJ9A -> ../../sda
lrwxrwxrwx 1 root root   9 Oct 12 17:17 ata-Hitachi_HUA723020ALA641_YFH93KTD -> ../../sdb
lrwxrwxrwx 1 root root  13 Oct 12 17:17 mmc-NCard_0x82f69016 -> ../../mmcblk1
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part1 -> ../../mmcblk1p1
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part2 -> ../../mmcblk1p2
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part3 -> ../../mmcblk1p3
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part4 -> ../../mmcblk1p4
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part5 -> ../../mmcblk1p5
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part6 -> ../../mmcblk1p6
lrwxrwxrwx 1 root root  15 Oct 12 17:17 mmc-NCard_0x82f69016-part7 -> ../../mmcblk1p7
lrwxrwxrwx 1 root root   9 Oct 12 17:17 wwn-0x5000cca223c9e05a -> ../../sda
lrwxrwxrwx 1 root root   9 Oct 12 17:17 wwn-0x5000cca223d23c42 -> ../../sdb