01-15-2021, 06:33 AM
I posted about this in the Debian on Pinephone board a little while back, since I use Mobian, looking for a vibration mtor test command but since it's more of a hardware issue maybe someone else will know something about it...
Back when I replaced my cracked screen I managed to damage the vibration motor on the USB-C side board by prying it up in the wrong place and breaking it apart.
I recently bought a replacement USB board with vibrator and installed it but still am not getting the confirming vibration when turning the phone on etc. Is there a command or program in any of the Pinephone distributions that can be used to manually test the vibration motor to see if it can work at all? (Charging is working through the USB port so I know the board is connected.)
Back when I replaced my cracked screen I managed to damage the vibration motor on the USB-C side board by prying it up in the wrong place and breaking it apart.
I recently bought a replacement USB board with vibrator and installed it but still am not getting the confirming vibration when turning the phone on etc. Is there a command or program in any of the Pinephone distributions that can be used to manually test the vibration motor to see if it can work at all? (Charging is working through the USB port so I know the board is connected.)
