OK, have got to the point where I can boot into either mobian or pmOS, but I don't get a gui on the phone for either of them!!! I can ssh in to either though.
I can't see any obvious problems in either log file which is irksome - need to try tweaking the kernel command lines a bit more but not sure what is best.
For the record mobian tries to map p1 to /boot in fstab so removed that, and for good measure (as I am running the f2fs version of mobian) I have added rootfstype=f2fs to the mobian start line in boot.conf.
@megous - I presume the p-boot partition (target of p-boot-conf, e.g. /dev/mmcblk0p1 on my PP SDcard) is not usable by us mere mortals? I can't even mount it. Also is dtb2 used by the released p-boot (in boot.conf) - I see you have it in the 13 system setup?
I can't see any obvious problems in either log file which is irksome - need to try tweaking the kernel command lines a bit more but not sure what is best.
For the record mobian tries to map p1 to /boot in fstab so removed that, and for good measure (as I am running the f2fs version of mobian) I have added rootfstype=f2fs to the mobian start line in boot.conf.
@megous - I presume the p-boot partition (target of p-boot-conf, e.g. /dev/mmcblk0p1 on my PP SDcard) is not usable by us mere mortals? I can't even mount it. Also is dtb2 used by the released p-boot (in boot.conf) - I see you have it in the 13 system setup?
- PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
- PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
- PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
- ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade
