08-07-2018, 09:05 PM
(This post was last modified: 08-08-2018, 12:07 PM by n0ctilucient.
Edit Reason: Typo
)
Thanx...
![[Image: loaded.jpg]](https://techreport.com/r.x/acard-ans9010/loaded.jpg)
I have the 200mb/sec (9010ba). I plan
to get the 400mb/sec (9010) ramdrive.
It's maximum capacity is 32gb of DDR2
800mhz Non-ECC... Non-buffered ram.
The OEM claims 64gb (but 8gb rails aren't available)
Bank (0) on the right side is loaded w/16gb
and it registers on the drive's LED.
I will be loading bank (1) soon.
The device is not listed on the ACARD (OEM)
website but is sold as new on eBay and Amazon.
http://www.acard.com/
![[Image: kraken.jpg]](https://image.ibb.co/fTAVOz/kraken.jpg)
@ the left top and bottom are dual side exhaust fans.
The Casetronic 1u chassis power supplies @ right top
and bottom also exhaust air out the front of the case.
http://www.casetronic.com/corporates/38-t1200.html
![[Image: 118-4062-01_1.jpg]](https://www.racksolutions.com/media/catalog/product/cache/1//550x/9df78eab33525d08d6e5fb8d27136e95/1/1/118-4062-01_1.jpg)
I use this chassis w/ this rack2tower stand.
https://www.racksolutions.com/rack-to-tower-1u.html
I could turn the board but the Ethernet would
be blocked by the PCI slot or the exhaust fan.
And finally...
I'm considering combining the AsRock x470 itx/ac Ryzen 5 2400G
x86 Vega gpu frontend with a Pine64 "clusterboard" headless backend...
![[Image: oX1Ri08Sng15Bbz8.jpg]](https://www.techpowerup.com/img/oX1Ri08Sng15Bbz8.jpg)
For now I'm using the AsRock QC5000 APU as
a frontend until I get this Ryzen 2400g APU.
I have the 200mb/sec (9010ba). I plan
to get the 400mb/sec (9010) ramdrive.
It's maximum capacity is 32gb of DDR2
800mhz Non-ECC... Non-buffered ram.
The OEM claims 64gb (but 8gb rails aren't available)
Bank (0) on the right side is loaded w/16gb
and it registers on the drive's LED.
I will be loading bank (1) soon.
The device is not listed on the ACARD (OEM)
website but is sold as new on eBay and Amazon.
http://www.acard.com/
@ the left top and bottom are dual side exhaust fans.
The Casetronic 1u chassis power supplies @ right top
and bottom also exhaust air out the front of the case.
http://www.casetronic.com/corporates/38-t1200.html
I use this chassis w/ this rack2tower stand.
https://www.racksolutions.com/rack-to-tower-1u.html
I could turn the board but the Ethernet would
be blocked by the PCI slot or the exhaust fan.
And finally...
I'm considering combining the AsRock x470 itx/ac Ryzen 5 2400G
x86 Vega gpu frontend with a Pine64 "clusterboard" headless backend...
For now I'm using the AsRock QC5000 APU as
a frontend until I get this Ryzen 2400g APU.
