04-24-2018, 05:10 PM
Hi all!
today i started my clusterboard project but i found the first big problem.
i flashed the memory card with Armbian image, put the Sopine module in his riser, turned the clusterboard on and nothig happens.
All the led near the riser never turns on, the RJ45 leds sometimes blinks for less than a second, but nothig appear connected to my switchport.
The only turned on led is the one on the sopine module..
Is this happened to someone else?
the img that i'm using is Armbian_5.41_Pine64so_Ubuntu_xenial_next_4.14.20.img (working perfectly on LTE board)
tried all the sopine modules with the same result.
Thanks to everyone for help
![[Image: KF5jbno.jpg]](https://i.imgur.com/KF5jbno.jpg)
today i started my clusterboard project but i found the first big problem.
i flashed the memory card with Armbian image, put the Sopine module in his riser, turned the clusterboard on and nothig happens.
All the led near the riser never turns on, the RJ45 leds sometimes blinks for less than a second, but nothig appear connected to my switchport.
The only turned on led is the one on the sopine module..
Is this happened to someone else?
the img that i'm using is Armbian_5.41_Pine64so_Ubuntu_xenial_next_4.14.20.img (working perfectly on LTE board)
tried all the sopine modules with the same result.
Thanks to everyone for help
