RockPro64 pcie Gpu
#1
Hey Guys,

 I have a qestion to the RockPro64. Is a nvidia 570 geforce compatible withe the RockPro64 ?
 I like to operate over the Pcie. What kind of Pcie I need (sometimes a Pcie x4 to Pcie x16 bridge) ?
 Did I need a special driver or a normal ARM64 driver. My other AMD GPU does not work. The Fans working normal but I get no signal from the HDMI port of the GPU.

I hope someone can hell me thanks  Big Grin
 
  Reply
#2
PC graphic cards have some x86 code that is called by the BIOS to early initialize the card so you can see text while booting. Of course this will not be available on non-x86 platforms. If the Xorg driver can initialize the card it may work, but you need it to be compiled for ARM (nouveau?). And you should make sure that the card is correctly detected. I could not use a SATA controller (LSI 9211-8i) until a hack named "pcie_rk_bus_scan_delay" was added to the kernel. You only need a riser/extender if you suspect that the Rockpro64 is not being able to supply enough current.
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Performance and Power Demand RockPro64 fotastisch 5 199 02-11-2020, 10:48 AM
Last Post: bavay
  Rockpro64 Case WIP xbcsmith 0 120 01-26-2020, 05:05 PM
Last Post: xbcsmith
  Rockpro64 Case WIP xbcsmith 0 50 01-26-2020, 05:02 PM
Last Post: xbcsmith
  RockPro64 & Roshambo Case Gouki 2 260 01-26-2020, 12:57 AM
Last Post: EagleFlyFree
  rockpro64 support in the rockchip uboot dedoz 0 126 01-13-2020, 01:51 PM
Last Post: dedoz
  RockPro64 Official uboot download dedoz 1 145 01-11-2020, 09:53 PM
Last Post: tophneal
  RockPro64 as Synology NAS alternative!? hemertje 4 277 12-23-2019, 03:34 PM
Last Post: Bullet64
  the 24/48 rockpro64 cluster LMM 8 880 12-15-2019, 11:55 AM
Last Post: Luke
  PCIe x4 mode - Lane 3 failure acdkyn 0 140 12-02-2019, 05:30 AM
Last Post: acdkyn
Question How to automatically reboot rockpro64 in case it shutdown abruptly ? seaurchin 2 134 11-25-2019, 08:46 AM
Last Post: tophneal

Forum Jump:


Users browsing this thread: 1 Guest(s)