Flash dhivael's SPI uboot (risky)

clover · 02-08-2020, 02:13 PM

(02-08-2020, 02:02 PM)Wizzard Wrote: I have Toshiba RC100, 240 GB. Will try Manjaro too

Edit: it boots

So happy to hear that. Do you know what the issue was?

Wizzard · (This post was last modified: 02-08-2020, 03:03 PM by Wizzard.)

Just flashed Manjaro on SD card and it boots Smile

Now I just have to set my Armbian on NVMe to boot, cause I did not care about that /boot/boot.txt Smile

cause the previous SPI did not need that.

Seems that it only works with Manjaro or it does not work with Armbian. I edited boot.scr in Armbian and renamed it to boot.txt but it does not boot...

as400 · 02-08-2020, 03:35 PM

(02-08-2020, 02:19 PM)Wizzard Wrote: Just flashed Manjaro on SD card and it boots

Now I just have to set my Armbian on NVMe to boot, cause I did not care about that /boot/boot.txt cause the previous SPI did not need that.

Seems that it only works with Manjaro or it does not work with Armbian. I edited boot.scr in Armbian and renamed it to boot.txt but it does not boot...

You have to edit boot.txt and than run mkscr script or mkimage command to create boot.scr.
Do not edit boot.scr directly.

Wizzard · 02-08-2020, 04:02 PM

Thanks! Just trying Manjaro again and it is not that bad. Anyway, Armbian had only boot.scr file and no boot.txt, so maybe it works different way on this distro.

Wizzard · 02-09-2020, 01:48 AM

Thank you very much guys for the help. It just seems that it only supports Manjaro. Neither Armbian not Ubuntu boots. Armbian has the boot.scr generated, but Ubuntu does not. Can I create it manually?

as400 · 02-09-2020, 01:55 PM

(02-09-2020, 01:48 AM)Wizzard Wrote: Thank you very much guys for the help. It just seems that it only supports Manjaro. Neither Armbian not Ubuntu boots. Armbian has the boot.scr generated, but Ubuntu does not. Can I create it manually?

Yes you can but it might be that Ubuntu uses extlinux.conf instead of boot.scr. Which is perfectly ok. Maybe even better since you can do whatever changes you want to the extlinux.conf and you don't have to generate anything,

In case you want to create boot.scr you have to create a text file (eg. boot.txt) with all the stuff you want. And then:

Code:
mkimage -A arm -O linux -T script -C none -n "U-Boot boot script" -d boot.txt boot.scr

belfastraven · 02-09-2020, 02:16 PM

(02-09-2020, 01:55 PM)as400 Wrote:
(02-09-2020, 01:48 AM)Wizzard Wrote: Thank you very much guys for the help. It just seems that it only supports Manjaro. Neither Armbian not Ubuntu boots. Armbian has the boot.scr generated, but Ubuntu does not. Can I create it manually?

Yes you can but it might be that Ubuntu uses extlinux.conf instead of boot.scr. Which is perfectly ok. Maybe even better since you can do whatever changes you want to the extlinux.conf and you don't have to generate anything,

In case you want to create boot.scr you have to create a text file (eg. boot.txt) with all the stuff you want. And then:

Code:
mkimage -A arm -O linux -T script -C none -n "U-Boot boot script" -d boot.txt boot.scr

Armbian should have both a boot.cmd file and also an armbianEnv.txt file. The Armbian boot.scr is generated from the boot.cmd, but many changes can be made by editing the armbianEnv.txt file. See the armbian Documentation for more info. You might just want to try writing the armbian build to an sd card, seeing if you can boot that way, and if so, using armbian-config to enable boot from SPI the NVME.

Wizzard · (This post was last modified: 02-09-2020, 02:21 PM by Wizzard.)

Yes, it uses extlinux.conf but it does not boot. What if I do not want any change, just want it to boot? If I do not provide boot.txt, it does not create boot.scr.

(02-09-2020, 02:16 PM)belfastraven Wrote: Armbian should have both a boot.cmd file and also an armbianEnv.txt file. The Armbian boot.scr is generated from the boot.cmd, but many changes can be made by editing the armbianEnv.txt file. See the armbian Documentation for more info. You might just want to try writing the armbian build to an sd card, seeing if you can boot that way, and if so, using armbian-config to enable boot from SPI the NVME.

Armbian does NOT boot from SD card Sad

as400 · 02-09-2020, 02:27 PM

(02-09-2020, 02:19 PM)Wizzard Wrote: Yes, it uses extlinux.conf but it does not boot. What if I do not want any change, just want it to boot? If I do not provide boot.txt, it does not create boot.scr.

Armbian does NOT boot from SD card

Out of curiosity - try to remove uboot on this Armbian SD card. And then try boot once more.

Code:
dd if=/dev/zero bs=32k seek=1 count=1 of=<microSD>

dd if=/dev/zero bs=64k seek=128 count=64 of=<microSD>

dd if=/dev/zero bs=64k seek=192 count=64 of=<microSD>

Wizzard · 02-09-2020, 02:43 PM

Still the same, green LED, blank screen with backlight.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	How to rewrite uboot to emmc	pineitup	5	9,958	12-27-2020, 10:35 AM Last Post: nightranger73
	Extracting a copy of SPI NOR flash contents using micro SD card and u-boot	hmuller	0	3,055	09-21-2020, 11:24 AM Last Post: hmuller
	Program SPI NOR Flash on Pinebook Pro with u-boot on micro SD Card	hmuller	0	3,757	09-21-2020, 10:02 AM Last Post: hmuller
	In-Circuit Programming of SPI NOR Flash	hmuller	13	20,536	09-13-2020, 01:20 PM Last Post: hmuller
	Installing Ubuntu 20.04 (Focal) with BSP uBoot with deep sleep and sound	Syonyk	43	60,231	07-28-2020, 03:18 PM Last Post: SamWilts
	How to boot Manjaro from NVME with uboot on eMMC	as400	47	64,275	06-07-2020, 02:37 AM Last Post: as400
	(almost) upstream uboot/atf	User 15997	27	34,904	02-08-2020, 10:18 PM Last Post: Natrox
	Widevine-flash on Chromium-SD Card	mamboman777	3	7,167	01-20-2020, 04:00 PM Last Post: tophneal

Login




Remember me Lost Password?

About Us