PINE64   ›   Pinecil   ›   General Discussion on Pinecil   ›   Pinecil Troubleshooting

Pinecil Troubleshooting
dlegs
Pine Initiate
**
Joined: Apr 2021
Posts: 1

Reputation: 0
#1
04-04-2021, 09:18 PM
Hi,

I used my Pinecil yesterday for a couple hours and today it stopped working. Connected to the PinePower Desktop via USB-C, it just repeatedly blinks on and off. Occasionally it will turn on after replugging, but the temperature is incorrect (shows 450 C) and the soldering tip never gets hot. I tried to flash the firmware, but the Pinecil won't enter USB mode (holding the minus button, plugging in, and releasing minus button) and the Pinecil Firmware Updater doesn't show that it's connected. Any help here would be great!

Cheers
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Pinepower suitable for an s23 (and a pinecil) its_lieseeeee 0 145 12-09-2024, 01:41 PM
Last Post: its_lieseeeee
  Pinecil constantly cutting out WroughtIron 0 178 11-15-2024, 10:37 AM
Last Post: WroughtIron
  Help with Pinecil saranelson 1 248 11-09-2024, 02:19 PM
Last Post: biketool
  pinecil v2 reverse polarity issue adamsk1952 0 415 09-12-2024, 07:54 AM
Last Post: adamsk1952
Sad Pinecil V2 screw broken! Carol8 1 302 09-09-2024, 08:44 AM
Last Post: Carol8
  Pinecil on Amazon? WEF 5 1,916 09-05-2024, 08:23 AM
Last Post: Jeb
Question Pinecil v2 power cycles at higher voltages? clemon79 3 2,332 08-10-2024, 05:47 AM
Last Post: RevAngel
Question Can Pinecil Read USB-C Cable E-Marker Chips? Garywoo 1 784 05-13-2024, 01:31 PM
Last Post: tllim
  Connecting a power supply to the Pinecil jon_bondy 1 1,096 02-29-2024, 07:37 PM
Last Post: Okedokey
  Crippling noise from inside pinecil during a few minutes high power soldering. dreieck 2 1,616 01-31-2024, 12:34 AM
Last Post: suga7

Forum Jump:


Users browsing this thread: 1 Guest(s)