Another stuck watch!

[GaryM]

Hi Ralph,

1st download the latest release, (pinetime-mcuboot-app-dfu-1.12.0.zip) from here: https://github.com/InfiniTimeOrg/InfiniT...tag/1.12.0

For Gadgetbridge you'll want to use this guide to install the zip file. https://github.com/InfiniTimeOrg/InfiniT...tbridge.md

Gary

Confirmed this worked in my case. Being stuck at the Infinitime logo for a while, but re-flashing did the trick.

To add: I left my watch completely drained before attempting this again. Had a new phone, so no prior connections to the watch had been made. Once at the Infinitime logo, I was able to get Gadgetbridge to see the device and connect to it (took two attempts, but the second attempt finally established a connection).

Was able to flash the firmware listed above.

Thanks GaryM.

Good to see you got it working! Just be sure you validate the software as stated in my earlier post. If you don't and the battery drains, it will revert back to the factory load or the same scenario you wound up in.

Have fun!
Gary