06-19-2020, 01:12 PM
(06-19-2020, 06:14 AM)tophneal Wrote: You really don't even need all of the script, you just need these 3 lines from the script run in terminal:
Code:sudo dd if=idbloader.img of=<eMMC/microSD> bs=32k seek=1 conv=fsync
sudo dd if=u-boot.img of=<eMMC/microSD> bs=64k seek=128 conv=fsync
sudo dd if=trust.img of=<eMMC/microSD> bs=64k seek=192 conv=fsync
Yes that's what i ended up doing, but still no luck booting the android image.
I went to /boot/ to check what's in there, and i can only see idbloader.img modified on june 13th. u-boot.img and trust.img aren't there.
(06-19-2020, 06:14 AM)tophneal Wrote: you can use any disk management software to find out if your emmc is mmcblk0 or mmcblk1 (do NOT write it to a partition ie mmcblk0p1.)I used the command
Code:
[root@MakkiPBP ~]# findmnt -n -o SOURCE /
/dev/mmcblk2p2
(06-19-2020, 06:14 AM)tophneal Wrote: For deep sleep, there's a single file change that gets made to enable it. This post outlines what you need to do (you can skip the first step) https://forum.pine64.org/showthread.php?...0#pid68720I'll give this a try soon and see how it goes (maybe my PBP isn't cursed after all )
Thanks again for your time.