Pinebook Pro not powering on / not booting (tried things listed in wiki/forum)
02-03-2020, 04:17 PM
So I tested the pin that say DC IN on the circuit board with respect to ground and the voltmeter shows 5.3 V.
@zaius and @Natrox: Not sure how to test the output of the regulators and use the schematic linked by @Natrox . To my shame I am not very good at reading circuit diagrams and connecting them to the real world situation, i.e. the pins on the circuit board. Also wouldn't I have to remove the motherboard for that and look on the bottom side? Not sure if this can be easily done with keeping all the periphery connected.
If anyone in Austin, Texas around who could help that'd be great!
@zaius and @Natrox: Not sure how to test the output of the regulators and use the schematic linked by @Natrox . To my shame I am not very good at reading circuit diagrams and connecting them to the real world situation, i.e. the pins on the circuit board. Also wouldn't I have to remove the motherboard for that and look on the bottom side? Not sure if this can be easily done with keeping all the periphery connected.
If anyone in Austin, Texas around who could help that'd be great!