01-07-2020, 09:38 PM
(01-07-2020, 04:49 PM)bcnaz Wrote: Seems to have worked for me so far.
I had purchased a 128gb eMMC that I flashed using the Pine Store eMMC to usb adapter.
First try with the eMMC using Etcher.
. ( I also loaded a copy onto an SD card )
. (I had to reseat the card and restart the Laptop I was using as it did not see )
. ( my SD card the first try, but it did work on the second try. )
> I still need to install the new 128gb eMMC into my PBP, So I will update this Post when I get
. the chance to proceed.
. Etcher does seem to be a good easy to use tool.
. I also used MrFixIt's OEM OS
Thank you for sharing
No problem. I used this method to upgrade my PBP to the 128 gig eMMC as well. It's been solid ever since.