12-29-2020, 11:13 PM
It is NOT at all wise to put any uboot on SPI until you have thoroughly tested it
Be aware the the uboot package for SPI is a bit different,,,, uboot at 6M and idbloader 'expanded'
One way to test,, on emmc, save mbr, save 1st 16M, blank (/dev/zero) 1st 16M, restore mbr
Then, only the uboot on SD is available, to boot emmc use a small (tiny) SD
with ONLY uboot on it (idbloader, uboot.itb OR idbloader,uboot.img,trust.img,,, mainline vrs bsp)
You will find that uboot (for pbp) is NOT at all mature
Be aware the the uboot package for SPI is a bit different,,,, uboot at 6M and idbloader 'expanded'
One way to test,, on emmc, save mbr, save 1st 16M, blank (/dev/zero) 1st 16M, restore mbr
Then, only the uboot on SD is available, to boot emmc use a small (tiny) SD
with ONLY uboot on it (idbloader, uboot.itb OR idbloader,uboot.img,trust.img,,, mainline vrs bsp)
You will find that uboot (for pbp) is NOT at all mature