RockPro64 Features/options working/not working
#1
Hey all,

I am trying to put together a list of features/options that are working/not working between Linux (Bionic 18.04) and Android (7.1.2). I would also like to provide info on how to test/verify each.

Ideally I would like to turn this into a wiki page but would like to gather info first.

Sadly it looks like there is no support for BB tables or any other ones. Sad This is the best I can do to start until I get this on the wiki.

[Image: HIXBEHX.png]
  Reply
#2
I cant add too much as I do not have too much plugged in.

All my comments are Linux (if applicable) - have never booted Android on mine.

HDMI audio - fine with 0.7.9 Ayufan release and say kernel 4.4.138-1100 so the hardware is fine, other releases/kernel versions are less reliable!

3.5mm audio - yet to hear mine under any config. There was 1 report of it working but the author has yet to explain how. 

My minimal test of the USB-C host was fine: plugged in a dongle/splitter gadget and could run a few USB 2 bits OK. Frank Mankel has done more throughput tests - would guess that includes the USB3 options but haven't checked.


The PCIe needs a book! For starters NVMe/SSD cards seem to be a no brainer - I have 2 different models, neither of which is Pine64, and have never missed a beat. I think there have been 1 or 2 hiccups with the Pine64 SATA card but cant find an immediate link - may well have been user specific rather than general. There are a couple of threads on broader PCIe cards - very few are a raging/unqualified success. e.g. here.

MIPI CAM is alleged to work under Android as per here  - haven't seen a report of it actually working though
ROCKPro64 v2.1 2GB, SM961 128GB NVMe for rootfs, HDMI video & sound, Bluetooth keyboard & mouse
Started Bionic minimal - now Cosmic, Openbox desktop for general purpose daily PC.
  Reply
#3
I will add this table to the wiki once I get access to the wiki. I need to wait a day or so until I can do that. Smile
  Reply
#4
(10-19-2018, 12:48 PM)lavermil Wrote: I will add this table to the wiki once I get access to the wiki. I need to wait a day or so until I can do that. Smile

... or just one more post Smile
You can find me on IRC, Discord and Twitter


  Reply
#5
(10-19-2018, 04:04 PM)Luke Wrote:
(10-19-2018, 12:48 PM)lavermil Wrote: I will add this table to the wiki once I get access to the wiki. I need to wait a day or so until I can do that. Smile

... or just one more post Smile

True True. Wait this is that post! HA!  Wink
  Reply
#6
Hello,

sound via 3.5mm Jack was working on minimal debian strech by ayufan.
I tested it , out of the box.

It was in a version around August, maybe the first one, it was there that I started fanctl( now ats )..

If I connect hdmi sound, jack doesn't work, and if I connect jack, hdmi sound doesn't work..
But I think at that time( ~3 months ago.. ), if I booted up without jack connected I wasn't able to have sound via 3.5mm jack..
Something like that..

In the bionic version, I have no jack sound, even rebooting with jack connected..only via hdmi..
But suspend works nice, on display, and sound..at least it seems..
  Reply
#7
(10-21-2018, 10:05 PM)tuxd3v Wrote: Hello,

sound via 3.5mm Jack was working on minimal debian strech by ayufan.
I tested it , out of the box.

It was in a version around August, maybe the first one, it was there that I started fanctl( now ats )..

If I connect hdmi sound, jack doesn't work, and if I connect jack, hdmi sound doesn't work..
But I think at that time( ~3 months ago.. ), if I booted up without jack connected I wasn't able to have sound via 3.5mm jack..
Something like that..

In the bionic version, I have no jack sound, even rebooting with jack connected..only via hdmi..
But suspend works nice, on display, and sound..at least it seems..

I will have to look at stretch.

Bionic OOB it doesn't work. In fact I only got sounds on hdmi to work on one install but cannot get it to work again on a new install. Sad
  Reply
#8
(10-21-2018, 10:05 PM)tuxd3v Wrote: Hello,

sound via 3.5mm Jack was working on minimal debian strech by ayufan.
I tested it , out of the box.

It was in a version around August, maybe the first one, it was there that I started fanctl( now ats )..

If I connect hdmi sound, jack doesn't work, and if I connect jack, hdmi sound doesn't work..
But I think at that time( ~3 months ago.. ), if I booted up without jack connected I wasn't able to have sound via 3.5mm jack..
Something like that..

In the bionic version, I have no jack sound, even rebooting with jack connected..only via hdmi..
But suspend works nice, on display, and sound..at least it seems..
I just realized what you mentioned. 


Quote:it was there that I started fanctl( now ats )..

Where is the source for ats?
  Reply
#9
(10-22-2018, 08:16 PM)lavermil Wrote: Where is the source for ats?

Hello lavermil,

The source is here:

Code:
https://github.com/tuxd3v/ats

regards
  Reply
#10
tuxd3v,

Thx

All,

I have added the table to the wiki of the RockPro64 MainPage. If anyone feels it is not best where I placed it, please update this forum with its new location.

http://wiki.pine64.org/index.php/ROCKPro...g_Features
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Photo RockPro64 Case 2x3.5" HDDs and 2x2.5 HDDs Luke 48 17,452 10-17-2019, 11:58 AM
Last Post: Tim Jones
  rockPro64 vs Odroid-N2 kardanadm 4 742 10-16-2019, 10:29 AM
Last Post: buzzmarshall
  RockPro64 & Roshambo Case Gouki 0 62 10-13-2019, 01:16 PM
Last Post: Gouki
  The leds and fan of RockPro64 xlx 0 60 10-10-2019, 12:19 PM
Last Post: xlx
  RockPro64 Fan Pins TheUnknownMuncher 1 112 10-08-2019, 12:44 PM
Last Post: TheUnknownMuncher
  Number of Rockpro64 boards sold/made fentavius 1 236 09-16-2019, 10:53 AM
Last Post: tllim
  board not working kardanadm 7 304 08-31-2019, 07:37 AM
Last Post: kardanadm
  Vulkan support with rockpro64 rahulsharma 2 223 08-21-2019, 10:34 PM
Last Post: rahulsharma
  ROCKPRO64 with 10GbE NICs H.HSEL 13 2,464 08-14-2019, 01:37 PM
Last Post: igorp
  RockPro64 not coming online after reboot imapc99 5 208 08-04-2019, 01:34 AM
Last Post: imapc99

Forum Jump:


Users browsing this thread: 1 Guest(s)