10-04-2018, 06:42 PM
(This post was last modified: 10-04-2018, 07:08 PM by romtorwator.)
conflict from PCI-E directly or only from booting from PCI-E NVMe devices?
When using the image 0.7.7-1057 booting from eMMC and the kernel to version 4.4.132-1068 will work?
(with PCI-E SATA-II adapter and BT/Wi-Fi module, without NVMe devices and without booting from PCI-E devices)
because sdio0 was disabled starting with the version of the kernel 4.4.132-1070
When using the image 0.7.7-1057 booting from eMMC and the kernel to version 4.4.132-1068 will work?
(with PCI-E SATA-II adapter and BT/Wi-Fi module, without NVMe devices and without booting from PCI-E devices)
because sdio0 was disabled starting with the version of the kernel 4.4.132-1070
_____________________________________________________________________________________________________________________________________________
my SOHO NAS RockPro64 4GB v2.1 / eMMC 32GB / PCIe -> 4*SATA Marvell 88SE9235 / SD-card 64 GB / NAS Casing / image Debian Stretch Minimal / Kernel 4.4.xxx ayufan
my Multimedia desktops: ASUS H310T G5500, ODROIDs -XU4, -XU3, -C2, -C1;
my trash BananaPi; RPi B, B+; ODROID-W
my SOHO NAS RockPro64 4GB v2.1 / eMMC 32GB / PCIe -> 4*SATA Marvell 88SE9235 / SD-card 64 GB / NAS Casing / image Debian Stretch Minimal / Kernel 4.4.xxx ayufan
my Multimedia desktops: ASUS H310T G5500, ODROIDs -XU4, -XU3, -C2, -C1;
my trash BananaPi; RPi B, B+; ODROID-W