10-25-2016, 06:08 AM
I note that the MAC addresses of the 4 pine64 I had purchased are always the same i.e. 36:c9:e3:f1:b8:05.
This may result in an address conflict with an already running device and potentially even the impossibility to startup the new pine64 device.
To solve the problem I change the MAC Address of all devices putting it in the /etc/network/interfaces file the following:
auto eth0
....
hwaddress ether XX:XX:XX:XX:XX:XX
Hope this can help someone.
This may result in an address conflict with an already running device and potentially even the impossibility to startup the new pine64 device.
To solve the problem I change the MAC Address of all devices putting it in the /etc/network/interfaces file the following:
auto eth0
....
hwaddress ether XX:XX:XX:XX:XX:XX
Hope this can help someone.