Kernel Panic on Rock64 linux
#11
Ok,Thank you!
  Reply
#12
Hi,

I also get kernel panics on every distribution I tried (and I tried nearly all), I tried two different SD cards (only have two).
I could get to run an Android build though. I checked for solder bridges but I coudn't find any. Anything else I can try? (I have the 4gb model)
  Reply
#13
Try different SD card, it is likely that your SD is just broken.
Homepage: https://ayufan.eu

Releases:
Rock/Pro 64/Pinebook Pro: LinuxChromium OS
So/Pine A64/Pinebook: LinuxAndroid 6.0Android 7.1

Buy me a Beer
  Reply
#14
getting the same error. Rock64 4gig version. Multiple memory cards, multiple build OSes Angry
  Reply
#15
(09-01-2017, 07:45 AM)polartx Wrote: getting the same error. Rock64 4gig version. Multiple memory cards, multiple build OSes Angry

Please check whether stock Android build also has the memory crash issue. If still getting Kernel Panic, please file a support ticket at support.pine64.org
  Reply
#16
I saw a kernel panic w/ xenial-minimal-rock64-0.4.17-85-arm64.img after I unplugged a USB 3.0 hard disk (nothing was mounted on it).  Seems like the OS thought it was still connected.

[ 7800.498794] INFO: task parted:5470 blocked for more than 120 seconds.
[ 7800.499779]       Not tainted 4.4.70-rockchip-ayufan-85 #1
[ 7800.500569] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 7800.502124] Kernel panic - not syncing: hung_task: blocked tasks
[ 7800.502998] CPU: 3 PID: 29 Comm: khungtaskd Not tainted 4.4.70-rockchip-ayufan-85 #1
[ 7800.504105] Hardware name: PINE64 ROCK64 (DT)

Playing with jessie-minimal-rock64-0.5.7-101-arm64.img now, and don't see the same issue.  It does take several seconds for it to decide the USB device is no longer available when I unplugged the cable.  Nothing was active when the cable was unplugged, it just spewed the following to the console :
[  873.393783] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  873.394805] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  873.395754] usb usb5-port1: cannot disable (err = -32)
[  875.910788] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  875.911801] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  875.912735] usb usb5-port1: cannot disable (err = -32)
[  878.426774] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  878.427787] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  878.428729] usb usb5-port1: cannot disable (err = -32)
[  880.943791] usb usb5-port1: Cannot enable. Maybe the USB cable is bad?
[  880.944809] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  880.945741] usb usb5-port1: cannot disable (err = -32)
[  880.946543] xhci-hcd xhci-hcd.8.auto: Cannot set link state.
[  880.947492] usb usb5-port1: cannot disable (err = -32)
[  880.948328] scsi host0: uas_post_reset: alloc streams error -19 after reset
[  880.952607] sd 0:0:0:0: [sda] Synchronizing SCSI cache

Edit: Looks like the latest jessie minimal also panics after disconnecting USB 3.0 device. Filed a issue on github, with ayufan (not sure if it was the right project page though).
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Rock64 v3 - POE P1V 3 312 Yesterday, 05:51 AM
Last Post: mcerveny
  Rock64 board seems defective, how to confirm? Josk 1 65 08-15-2019, 08:24 PM
Last Post: tllim
  Rock64 for video surveillance martinschm 4 203 08-12-2019, 11:55 AM
Last Post: pkfpeters
  Change Mac address on Linux fahr 3 407 08-07-2019, 03:31 AM
Last Post: AlexS
  Purchase Rock64 V3? richardk 6 428 08-03-2019, 12:56 PM
Last Post: mcerveny
  Rock64 running OMV, how to setup RTL8812AU WiFi? electrosam 2 116 07-16-2019, 04:03 PM
Last Post: ayufan
  Rock64 random freezes BTB 3 193 07-01-2019, 10:17 AM
Last Post: Luke
Sad Rock64 Seafile Installation klaus_nase 2 136 06-27-2019, 09:11 AM
Last Post: klaus_nase
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? hunderteins 5 366 06-22-2019, 12:36 PM
Last Post: redfish
  Another non-booting ROCK64 SuburbanDad 13 659 06-19-2019, 01:48 AM
Last Post: mcerveny

Forum Jump:


Users browsing this thread: 1 Guest(s)