Kernel Panic on Rock64 linux
#1
Video 
About My Rock64 occurred kernel panic.

I bought four Rock64 board.
2 of 4GB model,2 of 2GB model.
Other 3 boards works well.
One of 4GB model occurrd this problem every time.
Im using newest xenial-minimum and xenial-mate on MicroSD.
Power supply to GPIO 5V and GND by iPad Pro's 5V 2.4A charger.
But other 3 board work well under same MicroSD,OS image,charger.
So I think comatibility problem(or initial failure?)

movie:xenial minimum on microSD
pictureConfusedame(https://drive.google.com/file/d/0B58MjMV...sp=sharing)
I know how to fix this problem.
Sorry my bad english and Thank you forum member 




  Reply
#2
Does the board panic using all SD cards ?  If so, and if all SD card work in the other boards, then we can assume a hardware failure this one board;  open a support ticket.

Before you do that;  check the board over with a glass, or scope (eye piece),  to determine if any solder balls are left on the board from mfg;  this does occur unfortunately ( I actually had one board with this problem ).  Carefully check all spaces, pins, around all chips, in every connector;  also look for solder bridges.
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
  Reply
#3
(08-25-2017, 12:49 AM)MarkHaysHarris777 Wrote: Does the board panic using all SD cards ?  If so, and if all SD card work in the other boards, then we can assume a hardware failure this one board;  open a support ticket.

Before you do that;  check the board over with a glass, or scope (eye piece),  to determine if any solder balls are left on the board from mfg;  this does occur unfortunately ( I actually had one board with this problem ).  Carefully check all spaces, pins, around all chips, in every connector;  also look for solder bridges.

Thank you for reply.
I tried samsung,toshiba,and sillicon power Micro SD card.
But it is not changed.
I saw using ocula glass,I look for solder bridge around surface mount resister.
But I dont know this is cause of this problem or not.
  Reply
#4
(08-25-2017, 02:40 AM)tanisou Wrote:
(08-25-2017, 12:49 AM)MarkHaysHarris777 Wrote: Does the board panic using all SD cards ?  If so, and if all SD card work in the other boards, then we can assume a hardware failure this one board;  open a support ticket.

Before you do that;  check the board over with a glass, or scope (eye piece),  to determine if any solder balls are left on the board from mfg;  this does occur unfortunately ( I actually had one board with this problem ).  Carefully check all spaces, pins, around all chips, in every connector;  also look for solder bridges.

Thank you for reply.
I tried samsung,toshiba,and sillicon power Micro SD card.
But it is not changed.
I saw using ocula glass,I look for solder bridge around surface mount resister.
But I dont know this is cause of this problem or not.

can you post a close-in pic ?
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
  Reply
#5
(08-25-2017, 04:50 AM)MarkHaysHarris777 Wrote:
(08-25-2017, 02:40 AM)tanisou Wrote:
(08-25-2017, 12:49 AM)MarkHaysHarris777 Wrote: Does the board panic using all SD cards ?  If so, and if all SD card work in the other boards, then we can assume a hardware failure this one board;  open a support ticket.

Before you do that;  check the board over with a glass, or scope (eye piece),  to determine if any solder balls are left on the board from mfg;  this does occur unfortunately ( I actually had one board with this problem ).  Carefully check all spaces, pins, around all chips, in every connector;  also look for solder bridges.

Thank you for reply.
I tried samsung,toshiba,and sillicon power Micro SD card.
But it is not changed.
I saw using ocula glass,I look for solder bridge around surface mount resister.
But I dont know this is cause of this problem or not.

can you post a close-in pic ?

I suspicious this https://drive.google.com/open?id=0B58MjM...Vp3RFI4SkE





  Reply
#6
(08-25-2017, 05:54 AM)tanisou Wrote:
(08-25-2017, 04:50 AM)MarkHaysHarris777 Wrote:
(08-25-2017, 02:40 AM)tanisou Wrote:
(08-25-2017, 12:49 AM)MarkHaysHarris777 Wrote: Does the board panic using all SD cards ?  If so, and if all SD card work in the other boards, then we can assume a hardware failure this one board;  open a support ticket.

Before you do that;  check the board over with a glass, or scope (eye piece),  to determine if any solder balls are left on the board from mfg;  this does occur unfortunately ( I actually had one board with this problem ).  Carefully check all spaces, pins, around all chips, in every connector;  also look for solder bridges.

Thank you for reply.
I tried samsung,toshiba,and sillicon power Micro SD card.
But it is not changed.
I saw using ocula glass,I look for solder bridge around surface mount resister.
But I dont know this is cause of this problem or not.

can you post a close-in pic ?

I suspicious this https://drive.google.com/open?id=0B58MjM...Vp3RFI4SkE







Yes,  that is definitely a problem, but easily fixed !
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
  Reply
#7
But How to fix it?
  Reply
#8
(08-25-2017, 08:11 AM)tanisou Wrote: But How to fix it?

Its actually very easy ( really ).

... you use a 25 watt soldering iron and a tooth pick.  A hot air gun soldering station would be better, but if you don't have that ( they are pricey ) don't worry about it.

Basically you het the component carefully and you use the tooth pic to push it over where it belongs !

The pick&place robot slipped, or the component slipped in the oven. If you heat it and move it back it may work.  Depends on whether any damage occurred.  

Make sure YOU don't create any solder bridges ( you can used solder braid to clean it up if you do ).

( just don't do that )

Give it a shot;  like my old boss used to say, you can't break broke.    Blush
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
  Reply
#9
Thank you for teach me method.
I tried to fix it.
pic: https://drive.google.com/open?id=0B58MjM...1FJVVM4X00
After fixed it,I turn on Rock64.
But displayed same kernel panic error...

And I notice this spot become hotter than SoC chip.
https://drive.google.com/open?id=0B58MjM...1VVTlZMTEU
https://drive.google.com/open?id=0B58MjM...F9ZSncxeWs
  Reply
#10
(08-25-2017, 07:26 PM)tanisou Wrote: Thank you for teach me method.
I tried to fix it.
pic: https://drive.google.com/open?id=0B58MjM...1FJVVM4X00
After fixed it,I turn on Rock64.
But displayed same kernel panic error...

And I notice this spot become hotter than SoC chip.
https://drive.google.com/open?id=0B58MjM...1VVTlZMTEU
https://drive.google.com/open?id=0B58MjM...F9ZSncxeWs

well, you gave it the good 'ol college try !   open a support ticket and get that thing replaced .
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Rock64 random freezes BTB 5 636 04-07-2020, 03:19 AM
Last Post: tomarm
Photo ROCK64 v3 4GB DDR board memory chip number Johannes 2 187 04-05-2020, 04:29 AM
Last Post: Johannes
Big Grin Rock64 as a retro-gaming console: early impressions Luke 52 28,093 03-22-2020, 03:02 PM
Last Post: Labo
  Disable Auto Power On Rock64 willowen100 4 193 03-11-2020, 08:24 AM
Last Post: Rocklobster
  Rock64 running OMV, how to setup RTL8812AU WiFi? electrosam 3 496 02-21-2020, 01:49 AM
Last Post: bigtreeman
  rock64 only works with 546 MB bionic-minimal-rock64-0.6.40-226-arm64 danjperron 2 236 02-17-2020, 01:37 PM
Last Post: danjperron
  Rock64 v3 and SD-Cards Humberg 12 4,655 02-01-2020, 09:16 PM
Last Post: Leapo
  Rock64 v2 Locking Up when Accessing External Storage theGAXman 2 212 01-14-2020, 05:44 AM
Last Post: tomarm
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? hunderteins 6 827 01-14-2020, 05:36 AM
Last Post: tomarm
  Rock64 problems with external Hard Drive and powering mjd 1 234 12-14-2019, 10:05 AM
Last Post: helsinki92

Forum Jump:


Users browsing this thread: 1 Guest(s)