Rockpro64 with PCI FC Card - Not booting (Sometimes)
#1
Hi.

So i have FibreChannel PCIe x8 card, and i am trying to make it work with my RP64.

Most distros woun't boot with this card inserted, but I have found that Armbian 4.4.192 and MrFixit's debian build 4.4.180 will sometimes boot, and detect the card!

But it happens 1 time out of 6, and i have no idea why. Also I can't understand why this distros can run this card, and others just hang.

Anyway here is two bootlogs: succesful and the one that fails to boot.

If somone knows what is going on - please look at this logs.



Sucsess:
https://justpaste.it/8irfl

Fail:
https://justpaste.it/2oapd
#2
Edit!
I've find out that boot fail happening only if PCI addressees getting assigned by cpu0, cpu1, cpu2, cpu3!
If I get lucky (or disable cpus 0-3) and PCI address assigned by cpu4 or cpu5 - it will boot every time!

But how do i assign PCI address only by some specific cpu?


Possibly Related Threads…
Thread Author Replies Views Last Post
  Installing Wifi drive for the RockPro64 John45595 0 98 02-10-2024, 11:32 PM
Last Post: John45595
Wink You don't sell case and fan for "ROCKPro64 4GB Single Board Computer"? Clea 1 614 09-17-2023, 12:00 AM
Last Post: tllim
  Want to check maximum toggle speed in Rockpro64 board. kundanjha 0 591 08-14-2023, 07:55 AM
Last Post: kundanjha
  Unable to boot Armbian on new RockPro64 mooseball 5 3,976 07-14-2023, 08:59 AM
Last Post: rockjonn
  Hardware fix for software sound problem on Rockpro64 Ricks Rockpro 0 800 04-06-2023, 03:59 PM
Last Post: Ricks Rockpro
  No sound on Rockpro64 with OpenWrt Patrice 1 1,188 04-06-2023, 02:46 PM
Last Post: Ricks Rockpro
  Cant get rockpro64 working brasilikum 3 1,640 03-19-2023, 06:22 AM
Last Post: runyor
  RockPro64 Stopped working WarpLover 5 2,419 02-06-2023, 10:10 AM
Last Post: diizzy
Lightbulb ROCKPro64 + SSD case model for 3D print Spater 0 917 01-27-2023, 07:43 PM
Last Post: Spater
  RockPro64 and Neon rapier1 2 1,633 10-21-2022, 07:44 AM
Last Post: rapier1

Forum Jump:


Users browsing this thread: 1 Guest(s)